The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MQM The Light Source MQM Mega-Handle Square MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp MSRP: Now: $216.92 Add to Cart Altman Lighting | sku: AST-S-9000-P2-UL-SF-**-* Altman Suspension Set Crossbar View Details Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Astera | sku: TPC Astera TPC TrackPin Compact MSRP: Now: $33.30 Add to Cart Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Chauvet DJ | sku: GIGBARBRIDGEILS Chauvet DJ GigBAR Bridge ILS MSRP: $1,199.99 Now: $999.99 Add to Cart Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Chauvet Pro | sku: DRBF100CMIP Chauvet Pro DRBF100CMIP IP65-Rated Rig Bars MSRP: Now: $791.00 Add to Cart Chauvet Pro | sku: REMRB100CMIP Chauvet Pro IP Rated REM Series Rig Bar View Details Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Chauvet Pro | sku: REMRB50CMIPCURVE Chauvet Pro REM-RB50CM IP Curve IP Rated REM Series Rig Bar View Details
City Theatrical | sku: 1470 City Theatrical 1470 Ceiling Port for Source Four Par or D40 MSRP: Now: $293.12 Choose Options City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
City Theatrical | sku: 200 City Theatrical 200 Safer Sidearm Original MSRP: Now: $108.76 Add to Cart City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
City Theatrical | sku: 204 City Theatrical 204 Safer Sidearm Original with 24-inch Pipe and Two Sliding Tees MSRP: Now: $159.92 Add to Cart City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
City Theatrical | sku: 211 City Theatrical 211 1-1/2in. Pipe Pre-Drilled for Safer Sidearm MSRP: $35.00 Now: $31.39 Add to Cart City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
City Theatrical | sku: 27880001 City Theatrical 27880001 MAC Aura PXL Mount Kit, Including 3 Clips and 3 Screws MSRP: $27.71 Now: $23.55 Add to Cart City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
City Theatrical | sku: 290 City Theatrical 290 Safer Sidearm Pipe End Tail Down with 6' of 1-1/2" Pipe MSRP: Now: $287.11 Add to Cart City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
City Theatrical | sku: 4305 City Theatrical 4305 ETC Source Four LED Cyc Floor Base MSRP: Now: $91.35 Add to Cart City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
City Theatrical | sku: 520M City Theatrical 520M Track Tamer with Hex Nut, Metric MSRP: Now: $38.84 Add to Cart Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Claypaky | sku: 410100/001 Claypaky 410100/001 Floor Stand for Tambora Flash MSRP: $101.00 Now: $92.00 Add to Cart Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Elation | sku: NPL514 Elation NPL514 NET Plate Rackmount Blindplate 19" 1U, 14x D-Size MSRP: Now: $29.00 Add to Cart Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Elation | sku: SOL1IC Elation SOL1IC SOL I Interconnect MSRP: $25.00 Now: $20.80 Add to Cart Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Elation | sku: SOL1M10C Elation SOL1M10C Connect M10 Connector for SŌL I Blinder MSRP: $25.00 Now: $21.00 Add to Cart Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Exo Skeleton | sku: Cube kit (Black) Exo Skeleton Cube Kit (Black) MSRP: $670.27 Now: $533.50 Out of stock Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Exo Skeleton | sku: Cube kit (Silver) Exo Skeleton Cube Kit (Silver) MSRP: $646.99 Now: $517.98 Out of stock The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: BJW3/8M The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The Light Source BJW3/8M Mill Finish Bar Joist Washer 3/8" Bolt The bar joist washer hooks over the top of bar joists legs up to 1-7/16" wide. The U-shape of the bar joist washer prevents it from slipping off. Working Load Limit: 1,650 lbs. Order... MSRP: Now: $6.44 Add to Cart The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: M140CYC-E The Light Source M140CYC-E Curtain Track 20' Silver This item requires a custom freight quote. The Light Source M140CYC-E Curtain Track 20' Silver The M-140 Cyc Track is a walk-along studio/stage curtain track with rounded edges and is fully compatible with the H&H 300, and the ADC 140 style tracks... View Details
The Light Source | sku: MBP.5 The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Light Source MBP.5 Baby Pin With 1/2" 13 Male Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens with 1/2"-13... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MEM7 The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Light Source MEM7 Mega-Air Wall Hanger 7" Mill Finish The Mega-Airwall Hanger 7" is 750 pound load rated. The Mega-Airwall Hanger will fit a wide variety of air wall tracks. The Mega-Airwall Hanger engages the airwall track the full length of the... MSRP: Now: $225.22 Add to Cart The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MQM The Light Source MQM Mega-Handle Square The Light Source MQM Mega-Handle Square The Mega-Handle stays permanently with the fixture. It installs by removing the 1/2" by 3" square head set screw from the clamp and slipping the Mega-Square cloverleaf over the screw from the threaded end. The... MSRP: Now: $8.05 Add to Cart The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MTDCASTOR The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" The Light Source MTDCASTOR Castor For Mega-Truss Dolly 4" Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are sold... MSRP: Now: $52.25 Add to Cart The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: TC-HWP The Light Source TC-HWP TC Clamp Hardware The Light Source TC-HWP TC Clamp Hardware TC Clamp hardware includes:1/2" Hex Head Cap ScrewGrade 5 Nylock Jam Nut1" Diameter Belleville Washer Hardware Packs include 12 of each part. MSRP: Now: $23.10 Add to Cart Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Exo Skeleton | sku: EXCB-B Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Exo Skeleton EXCB-B Exo Cube Six Angle Building Cube Module Overview Six Angle building cube module for Astera Helios, Titan and Hyperion. Aluminium Silver anodized with (6x) M5 threads and (24x) M4 threads. The Exo Cube is a six angle module to... MSRP: $68.00 Now: $66.00 Out of stock Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Exo Skeleton | sku: EXTY- Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Exo Skeleton EXTY Exo Trey Triangle 120° Building Module Overview Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminium Silver Anodized with (4x) M5 threads and (12x) M4 threads. (2x) M5X10 hex screws with hex key SW4... MSRP: $65.00 Now: $64.00 Out of stock The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: 6061-PI-1.5-S40-120 The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' The Light Source 6061-PI-1.5-S40-120 Mill Finish Sch 40 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The pipe... MSRP: Now: $92.66 Add to Cart The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MSAB18 The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish The Light Source MSAB18 Mega-Sidearm 18" Fixed Length Black Finish Mega-Sidearm Fixed Length Available in 12", 18", 24", 30" and 36" Lengths. Black or Mill finish. The Fixed Length Mega-Sidearm is a stable 2" Mega-Coupler attached to a 1.315" OD 1"... MSRP: Now: $65.64 Add to Cart The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: WM1.5PM The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish The Light Source WM1.5PM Wall Mount For 1.5" Nominal Pipe Silver Finish Quickly secures 1.5" (1.9" O.D.) pipes to the wall for permanent or temporary installations. 1/2"-13 tpi Cup Point Socket Set Screw locks to pipe with a ¼" hex key.Flange... MSRP: Now: $28.31 Add to Cart Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Chauvet DJ | sku: CH06 Chauvet DJ CH06 T-Bar Tripod CH-06 (T-Bar Tripod) CH-06 is a portable, lightweight T-Bar tripod stand with a 50 lbs. (5 kg) weight capacity and quick setup and teardown time. Easy-to-hang mounting points and an extra adaptor turn the CH-06 into the perfect base for mounting small... MSRP: $87.11 Now: $70.00 Add to Cart The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: 6061-PI-1.5-S80-120B The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' The Light Source 6061-PI-1.5-S80-120B Black Anodized Sch 80 Pipe 10' NOTE: This item ships via freight due to its length and has a fixed shipping cost. Our standard grid pipe is 1.5" schedule 40 aluminum pipe. It is available in black or silver. The... MSRP: Now: $135.14 Add to Cart The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MBC3T-16B The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Light Source MBC3T-16B Mega-Beam Clamp 16" 3-Ton Black Finish The Mega-Beam Clamp is a low profile, sliding jaw design that allows a load to be secured as closely as possible to the I-beam. The 10" model is load rated for 3 tons. Two aircraft... MSRP: Now: $489.06 Add to Cart The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MBP.375-FEMALE The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Light Source MBP.375-FEMALE Baby Pin With 3/8" 16 Female Threads The Mega-Baby Pin will allow Motion Picture style lighting fixtures with a 5/8" inch receiver to be used with any of our clamps with 1/2" mounting threads. The Mega-Baby Pin fastens... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MCM-BLACK The Light Source MCM-BLACK Mega-Combo Wrench Black Finish The Light Source MCM-BLACK Mega-Combo Wrench Black Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MCM-PURPLE The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish The Light Source MCM-PURPLE Mega-Combo Wrench Purple Finish Handy pocket wrench to focus lights. Fits on your keychain, and 1/2" and 5/16" hex head and square head bolts. Colors may vary. Order Codes MCM Mega-Combo Wrench,... MSRP: Now: $15.44 Add to Cart The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
The Light Source | sku: MTD-K-CPLRINST The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit The Light Source MTD-K-CPLRINST Truss Dolly Mega-Coupler Install Kit Replacement Mega-Truss Dolly castors are available. Mega-Coupler install kits provide the components to add Mega-Couplers to the regular Mega-Truss Dolly. Since Mega-Truss Dollies are... MSRP: Now: $218.79 Add to Cart Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Exo Skeleton | sku: EXTP-KIT-B Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Exo Skeleton EXTP-KIT-B Exo Trey Pro24 Kit B-Plate Overview (24x) Triangle (120°) building module for Astera Helios, Titan and Hyperion. Aluminum Black Anodized, with (4x) M5 threads and (12x) M4 threads. (24x) B-Plate to connect two... MSRP: $2,294.00 Now: $2,032.00 Out of stock ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
ADJ | sku: Accu Stand VFB ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar ADJ Accu Stand VFB Floor Base to Mount Electrapix Bar Overview The Accu Stand VFB is a robust and versatile solution designed specifically for the vertical mounting of up to four ElectraPix Bar 8 units or two ElectraPix Bar 16... MSRP: $309.95 Now: $249.99 Add to Cart ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
ADJ | sku: FLEX45RB ADJ FLEX45RB 45 Rigging / Base Bar ADJ FLEX45RB 45 Rigging / Base Bar Overview ADJ FLEX45RB 45 Rigging / Base Bar MSRP: $699.95 Now: $549.99 Pre-Order Now ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
ADJ | sku: LTS50T AS ADJ LTS50T AS Portable Trussing System ADJ LTS50T AS Portable Trussing System Overview The LTS50T AS Portable Trussing System from American DJ is a completely portable support system that includes two 9' steel tripods and two 5' I-beams with a truss diameter of 1... MSRP: $319.95 Now: $244.99 Add to Cart ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
ADJ | sku: Pro Event Ibeam ST ADJ Pro Event Ibeam ST ADJ Pro Event Ibeam ST Overview Elevate your lighting setup with the Pro Event I-Beam ST from American DJ. Made to be attached to all the versions of the Pro Event Table, this 87" high aluminum I-beam truss allows you to hang up to 80 lb... MSRP: $357.95 Now: $299.99 Add to Cart ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
ADJ | sku: VS3IPGSCSB ADJ VS3IPGSCSB LED Video Panel Support Bar ADJ VS3IPGSCSB LED Video Panel Support Bar Overview ADJ VS3IPGSCSB is a Clamp Support Bar for the VS3IP LED Video Panels. Compatible with VS3IP only. MSRP: $139.95 Now: $99.99 Out of stock ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
ADJ | sku: WMSRB1 ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel ADJ WMSRB1 Free Hang, 1-Meter Rigging Bar for One WMS2 Panel Overview The ADJ WMSRB1 is a free hang, 1-Meter Rigging Bar for one WMS2 Panel. MSRP: $419.95 Now: $299.99 Add to Cart Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Altman Lighting | sku: 506-24 Altman 506-24 24" Double Pipe Clamp Extension Altman 506-24 24" Double Pipe Clamp Extension Overview Altman offers the 506-24, a 24" double pipe clamp extension. The 506 extension clamps are provided with a 510 pipe clamp on each end for hanging one pipe from another. All items are finished in... MSRP: $124.00 Now: $98.80 Add to Cart Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Altman Lighting | sku: 509-HD-12-1 Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-12-1 12-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-12-1 12" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $107.08 Add to Cart Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Altman Lighting | sku: 509-HD-18-1 Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-18-1 18-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-18-1 18" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from... MSRP: Now: $134.56 Add to Cart Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Altman Lighting | sku: 509-HD-24-1 Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp Altman 509-HD-24-1 24-inch Custom Side Arm with Sliding Tee and Pipe Clamp The 509-HD-24-1 24" Custom Side Arm with Sliding Tee and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a... MSRP: Now: $162.92 Add to Cart Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Altman Lighting | sku: 509-HD-24-2 Altman 509-HD-24-2 24-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-24-2 24-inch Custom Side Arm The 509-HD-24-2 24" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom. It... MSRP: Now: $185.80 Add to Cart Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |
Altman Lighting | sku: 509-HD-36-2 Altman 509-HD-36-2 36-inch Custom Side Arm with Two Sliding Tee and Pipe Clamp Altman 509-HD-36-2 36-inch Custom Side Arm The 509-HD-36-2 36" Custom Side Arm with Two Sliding Tees and Pipe Clamp from Altman extends the mounting positions of light fixtures and other equipment from a vertical pipe or boom... MSRP: Now: $216.92 Add to Cart Altman Lighting |