Product Description
PXM Lighting PX385 0-10 Volt DMX Interface
Overview
The PX385 module is used to process DMX-512 signal to analogue control 0 - 10 V or 1 - 10 V with a relay (Relay Mode).
The DMX/0-10 Interface 1ch has a DMX connector and 1 output voltage channel. PX385 can be controlled using a DMX signal (the device has a built-in DMX-512 signal receiver), and it can operate independently. The DMX address for the device is set manually using the DIP switch located on the housing, with the RDM protocol or using the PX277 configurator.
What is more, the user can set the output value if a DMX signal is lost.
In addition, the device supports the RDM protocol.
The device is manufactured in an aluminium housing.
The device is powered by 230V AC.
Specifications
output channels | 1 |
outputs load capacity | analogue 0-10V: max. 10mA resistive load: max. 2A, 250 V AC inductive load: max. 0.5A, 250 V AC |
output connectors | screw terminals |
power supply | 230 V AC |
weight | 0,18 kg |
dimensions | Width: 44,2 mm Height: 35,5 mm Depth: 143,4 mm |