Product Description
ILC LSDMXD-R LightSync DMX Output Driver - Remote Mount
The LightSync Digital DMX Driver Module is designed to drive DMX512 levels from a LightLEEDer lighting controller using RS485 communications. Each LS DMX Driver Module is capable of controlling up to 64 channels per module, per panel in the LightLEEDer system. Each dimming output channel can be mapped to control from 1 to all of the 512 DMX channels. This module connects to the local LightSync port on the LightLEEDer controller and can be mounted in the panel or remotely. The DMX output control channels are controlled from 0 -100% using the dimming controls in the lighting controller.
FEATURES
• Made in the USA
• Digital CAT-5 Ready
• DMX512 output driver
• Supports the full 512 DMX channels
• Direct control of any DMX channel from the lighting control panel
• Map any dimming output channel to any DMX channel
• 64 dimming output channels per pane
• Controlled using LightLEEDer options which include; Timers, Presets, inputs, sliders, and data line devices
• Installs directly into any panel or remotely
• Configured through the keypad or with LightLEEDer Pro software
• DMX mapping can be 1 to 1, or programmable with LightLEEDer DMX Output Map software
SPECS
Physical:
• 3.75" wide X 3.50" high
• Screw connector for DMX
• USB mini software programming interface
• Rotary address and range switches
• Configuration dip switches
• Status diagnostic LEDs provided
• Data line terminator resistor enable jumper
• Easy installation into any panel
Remote Mount Physical:
• Enclosure: 6.50”x 9.25”x 2.50 ”with screw cover
• 1/2”nipple for mounting to an electrical box
• 6”wire leads provided for high voltage connection
• Push-to-connect low voltage connections
• Provided with pre-drilled mounting holes
Electrical:
• 120/277VAC
• Current: 150mA
• Voltage: 24VAC/ 24VDC
Operating Environment:
• Location: Interiorspace
• Operating Temp: 0°-50° C
• Humidity: 10%-90% Non-condensing
• Atmosphere: Non-explosive/corrosive
• Vibration: Stationary
Certifications and Approvals:
• UL CUL