Doug Fleenor Design PRE10-A-POPO Preset 10 Architectural 10-Button Push-on/Push-off Wall Mounted DMX Controller - Black

Doug Fleenor Design PRE10-A-POPO Preset 10 10-Button Push-on/Push-off DMX Controller The Preset 10 Architectural is a lighting control station capable of storing up to ten presets. These presets are recorded by capturing the output of a DMX512 console...

Doug Fleenor Design 125EE-WALL Enhanced Isolated Amplifier and Splitter - One Input/Five Outputs - Terminal Blocks - Wall Mount

Doug Fleenor Design 125EE-WALL Enhanced Isolated Amplifier and Splitter - Wall Mount The model 125EE-WALL isolated splitter is our standard 125EE in a wall mount enclosure. The same circuit board is mounted in a purpose-built housing specifically...

Doug Fleenor Design DMX12ANL-TB 12-Channel DMX to Analog Converter - 0-10V Output - Terminal Blocks

Doug Fleenor Design DMX12ANL-TB 12-Channel DMX to Analog Converter - Terminal Blocks The DMX12ANL-5 and DMX12ANL-TB series are 12 channel DMX512 to analog 0-10V interfaces. They are available with either 5 pin XLR connectors or pluggable terminal blocks...

Doug Fleenor Design XFMR Power Transformer for up to 5 Architectural Stations

Doug Fleenor Design XFMR Power Transformer for up to 5 Architectural Stations The model XFMR is a class 2 "doorbell" transformer. It is suitable for use with the PRE8-A, PRE10-A, PRE10-A2, ES2 and RERUN-A.  

Doug Fleenor Design DMX2REL5A Two Channel DMX512 Controlled Low Voltage Relay Pack

Doug Fleenor Design DMX2REL5A Two Channel DMX512 Controlled Low Voltage Relay Pack DMX512 control of low voltage switch closure devices (such as slide projectors and fog machines) is made possible with the Two Channel DMX Controlled Low Voltage Relay...

Doug Fleenor Design DMX6REL30A-JBOX Six relays, 120VAC input and output, two input power cables, 15A total connected load per input cable, in junction box

Doug Fleenor Design DMX6REL30A-JBOX 6-Channel DMX Relay Pack in Junction Box The Six Channel DMX512 Controlled Relay Pack receives DMX512 and uses the levels to open or close dry contact relays. A relay is closed when its level exceeds 60%. The relay is...

Doug Fleenor Design DMXTSTR-3 DMX Line Tester - 3 pin XLR

Doug Fleenor Design DMXTSTR-3 DMX Line Tester - 3 pin XLR The DMX512 Line Tester instantly displays the presence of the +Data and -Data signals when plugged into a DMX control line or feed-through connector. Observing the indicators while fading all the...

Doug Fleenor Design GIZMO DMX Tester and Signal Generator

Doug Fleenor Design GIZMO DMX Tester and Signal Generator The Gizmo is a DMX512 test tool with features useful for lighting system setup, testing, troubleshooting, and commissioning. With the Gizmo you can transmit, receive, save, playback scenes and...

Doug Fleenor Design PRE10-P 10-Button Portable 5-pin DMX Controller

Doug Fleenor Design PRE10-P 10-Button Portable 5-pin DMX Controller The Preset 10 Portable can act as a seamless backup for DMX512 lighting consoles or as a stand-alone DMX512 preset console. The Preset 10 Portable is capable of storing up to ten...

Doug Fleenor Design PRE10-P-POPO 10-Button Push-on/Push-off Portable 5-pin DMX Controller

Doug Fleenor Design PRE10-P-POPO 10-Button Push-on/Push-off Portable 5-pin DMX Controller The Preset 10 Portable can act as a seamless backup for DMX512 lighting consoles or as a stand-alone DMX512 preset console. The Preset 10 Portable is capable of...

Doug Fleenor Design PRE8-D Preset 8 Desktop - 8 Slider DMX Controller

Doug Fleenor Design PRE8-D Preset 8 Desktop - 8 Slider DMX Controller Preset 8 is a lighting control station that stores eight preset looks. Each look, or scene, has an associated slider that adjusts the intensity of that look. The looks are recorded...

Doug Fleenor Design RAD RDM Remote Addressing Device

Doug Fleenor Design RAD RDM Remote Addressing Device The Remote Addressing Device (model: RAD) is used to set the DMX address of compatible products using DMX/RDM. RDM (Remote Device Management) is an enhancement to DMX512 which allows status...

Doug Fleenor Design RK6-1 Rack Mount Kit for 6.5-inch Chassis Devices

Doug Fleenor Design RK6-1 Rack Mount Kit for 6.5-inch Chassis Devices This Rack Mount Kit adapts products that use the 6.5" Stepladder Series Chassis to a standard 19" rack. These products include the model 121, 121D, 123, DMX1REL20A, DMX2REL5A,...

Doug Fleenor Design SW1-TB DMX A/B Switch Box - 1 Universe - 1-Output - Terminal Blocks

Doug Fleenor Design SW1-TB DMX A/B Switch Box - 1 Universe - 1-Output - Terminal Blocks Doug Fleenor Design makes a series of selector switches specifically designed to switch DMX512 signals. Originally designed to switch between primary and backup...

Doug Fleenor Design SW4-5 DMX A/B Switch Box - 4 Universe - 4-Outputs - 5 pin XLR

Doug Fleenor Design SW4-5 DMX A/B Switch Box - 4 Universe - 4-Outputs - 5 pin XLR Doug Fleenor Design makes a series of selector switches specifically designed to switch DMX512 signals. Originally designed to switch between primary and backup consoles,...

Doug Fleenor Design TERM-5 DMX Terminator - 5 pin XLR

Doug Fleenor Design TERM-5 DMX Terminator - 5 pin XLR The DMX Terminator plugs into the feed-through connector of the final DMX device on a control cable. Using the DMX Terminator improves signal reliability by preventing reflections and reducing...

Doug Fleenor Design 121-3 Isolated Amplifier and Splitter - One Input/One Output - 3 pin XLR

Doug Fleenor Design 121-3 Isolated Amplifier andSplitter - One Input/One Output - 3 pin XLR The DMX splitter is available in three standard configurations: three, five, or eleven outputs from a single DMX input. An enhanced five output splitter with...

Doug Fleenor Design 121-5 Isolated Amplifier and Splitter - One Input/One Output - 5 pin XLR

Doug Fleenor Design 121-5 Isolated Amplifier and Splitter - One Input/One Output - 5 pin XLR The DMX splitter is available in three standard configurations: three, five, or eleven outputs from a single DMX input. An enhanced five output splitter with...

Doug Fleenor Design 121-JBOX - One Input/One Output Circuit Board with Terminal Blocks in Junction Box

Doug Fleenor Design 121-JBOX - Circuit Board with Terminal Blocks in Junction Box Doug Fleenor Design is pleased to provide mounting of our products in NEMA enclosures. This service allows contractors to install the product immediately when it arrives...

Doug Fleenor Design 121-RJ-ESTA Isolated Amplifier and Splitter - One Input/One Output - RJ-45 Connectors with ESTA pinout

Doug Fleenor Design 121-RJ-ESTA Isolated Amplifier and Splitter - RJ-45 Connectors The DMX splitter is available in three standard configurations: three, five, or eleven outputs from a single DMX input. An enhanced five output splitter with...

Doug Fleenor Design 121-TB Isolated Amplifier and Splitter - Terminal Blocks - One Input/One Output