- Integrated Dante™ / AES67 Networked Audio – Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.
- Network Configuration, Monitoring & Control – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
- Programmable General Purpose Input/Output Port – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
- Digital Signal Processing – DSP capabilities include the following:
- LevelMAX Limiters
- Input/Output EQ
- Crossover
- Delay
- Matrix Router
- Speaker Line Monitoring
Specifications
Output Channels | 4 |
Frequency Response (8Ω, 20Hz - 20kHz) | ±0.25dB |
Total Harmonic Distortion (at full rated power, 20Hz - 20kHz) | 0.35% |
Damping Factor (20Hz to 100Hz) | >1000 |
Load Impedance (Stereo/Dual Mode) | 2Ω - 16Ω; 70Vrms and 100Vrms |
Load Impedance Bridge Mono | 4Ω - 16Ω; 140Vrms and 200Vrms |
Cooling | Continuously variable speed forced air, front to back airflow |
Maximum Fan Noise (re dBA SPL @ 1M) | 45 |
Required AC Mains (±10%) | 100V-240V ~ 50/60Hz |
Power Connector | 15A IEC |
Dimensions (W x H x D) | 483 mm x 89 mm x 362 mm 19 in x 3.5 in x 14.25 in |
Weight | 9.12 kg (20.1 lbs) |