Product Description
Crown Audio DriveCore Install 2|2400N 2400W 2-Channel Network Amplifier with BLU Link
Overview
The Crown Audio DriveCore Install 2|2400N is a 2400W, 2-channel, BLU Link network amplifier with advanced features and flexibility that's required by system integrators for challenging 21st century installed sound applications.
The 2/2400N can produce up to 2400W of output per channel at 2, 4, 8 or 16 ohms or 70 or 100 volts rms. It is compatible with Harman's BLU Link digital audio transport and accepts digital inputs via its rear-panel RJ-45 connectors. This digital control allows for networked monitoring, recallable presets, and the setup of secondary inputs that engage if the primary inputs fail. The 2|2400N also has built-in DSP capabilities including limiting, input/output EQs, delay, and a matrix mixer.
Its two channels can be bridged for powering higher power applications such as a subwoofer. The 2|2400N also has channel-independent high- or low-impedance output that is selectable from the rear-panel DIP switches. This allows you to integrate the amplifier into a variety of different setups. Each of its 2 channels additionally features independent attenuators, ranging from 0 to -80 dB.
The front panel of the 2|2400N provides a series of system indicators, including level and signal, ready, clip, thermal, and fault alerts for quick visual monitoring of the system. The unit can be integrated into a control system for powering on and off as well as engaging its sleep mode for saving energy when not in use. The 2|2400N is rack-mountable and requires 2 RU of space. A 20A IEC power cord is included.
Network Monitoring & Control
Programmable General Purpose Input/Output Ports
DSP
Direct Drive Constant Voltage
Channel-Independent Hi-Z/Low-Z Selection
Bridgeable Channel Pairs
Remote On/Off Interface
Efficient Cooling Design
Auto Standby
TLC Protection
Advanced Protection Circuits
In the Box
- Crown Audio DriveCore Install 2|2400N 2400W 2-Channel Network Amplifier with BLU Link
- Limited 6-Year Warranty
Features
- 2400W per Channel
- Network Monitoring
- BLU Link Digital Audio & DSP
- Rack-Mountable
- Channel-Independent Hi-Z or Low-Z Output
- Bridgeable Channel Pairs
- Front-Panel Indicators
- Channel-Independent Attenuators
- Sleep Mode
- Includes 20A IEC Power Cord
Specifications
Number of Channels | |
Amplifier Power Rating | |
Load Impedance / Voltage | |
DSP | |
Analog Audio I/O | |
Digital I/O | |
Rackmount Size |
Amplifier Power Rating | |
Load Impedance / Voltage |
Frequency Response | |
Damping Factor | |
Input Sensitivity | |
Input Impedance | |
Max Gain | |
Max Input Level | |
SNR | |
THD | |
Intermodulation Distortion | |
Crosstalk | |
Common Mode Rejection Ratio (CMRR) |
DSP | |
Crossover | |
Ducking/Muting | |
Limiting |
Analog Audio I/O | |
Digital I/O | |
USB I/O |
AC Input Power | |
AC Power Connector | |
Current Consumption | |
Power Consumption |
Display & Indicators | |
Rackmount Size | |
Cooling | |
Dimensions | |
Weight |