Product Description
Williams Sound IR SY22 D Dante Infrared System with Bodypack Receivers
Commercial-grade, large-area Dante infrared system with IR+ transmitter, 4 emitters and array.
System Includes
(1) IR M1 D infrared modulator with Dante input
(4) IR E4 emitters,
(1) IR A4 array
(4) WIR RX22-4N receivers
(2) BAT KT6 dual bay chargers
(4) EAR 022 earphones
(1) IDP 008 ADA wall plaque
IR M1 Specs
Dimensions: |
19” (W) x 1.75” (H) x 8.2” (D) |
Weight: |
5.2lb. (2.4 kg) |
Color: |
Black |
Rack Mount: |
Single Rack Unit |
Power Supply: |
International Desktop Supply |
Power Switch: |
Rocker switch with LED |
Signal to Noise Ratio: |
67 dB (typical) |
Modulation: |
FM Wideband, +50kHz deviation, 50uS pre-emphasis |
Carrier Frequency: |
Selectable, 2.3/2.8 or 3.3/3.8MHz |
Frequency Response: |
40 to 16,000Hz, +1 dB, -3dB, electrical response |
Total Harmonic Distortion: |
Less than 2%, electrical response |
Audio Processor Functions: |
DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control |
Auto Carrier Shut-Off: |
Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage. |
Infrared Test LED: |
Dual IR LED for receiver testing, monitoring, and audio signal testing. |
Audio Input: |
(2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power |
Dante: |
Optional |
Internal Test Tone: |
400 Hz internal test tone selectable as audio input source for setup and diagnostics |
Remote Configuration: |
Available through embedded website |
Headphone Output: |
(2) 1/4″ headphone jacks on front panel for monitoring CH A and CH B audio inputs |
Emitter Output Jack: |
Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission. |
Operating requirements: |
0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere |
Approvals: |
CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI |
Warranty: |
2 years on Modulator, 90 days on accessories |
IR E4 Specs
Dimensions: |
7.5” (W) x 1.4” (H) x 3.6” (D) |
Weight: |
0.8 lb (362 g) |
Color: |
Black |
Power: |
48 VDC supplied by IR M1 via CAT 5e cable. |
Coverage Area: |
Up to 18,000 square feet in single channel mode |
Connectivity: |
+48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1. |
Operating requirements: |
0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere |
Approvals: |
CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI |
Warranty: |
2 years on Emitter; 90 days on accessories |
CHG 520 Specs
Dimensions: |
12″L x 6.25″W x 1.5″H (30.48 cm x 15.875 cm x 3.81 cm) |
Weight: |
13.6 lbs |
Color: |
Black metal and plastic |
Power Supply Input: |
120 VAC |
Power Supply: |
100-240V / 12VDC TFP 043 |
Unit Capacity: |
5 Units |
Indicators: |
Individual Charging Indicators: Red LEDs |
Warranty: |
1 year (90 day warranty on cables and power supply) |
Approvals: |
WEEE, RoHS, CE, FCC, CANADA, RCM, VCCI |
IR RX20 Specs
Weight: |
1.6 oz |
Material and Color: |
IR Transparent polycarbonate, black |
Battery Type: |
LiPo |
Battery Life: |
8 hours |
Battery Charger: |
CHG 520 |
Operating Temp: |
32-122° F (0-50° C) |
Range: |
Up to 15,000 sq. ft. in single channel mode with IR T2 transmitter |
Operating Frequency: |
2.3 MHz or 2.8 MHz or stereo |
Frequency Response: |
100 Hz to 12 kHz, ± 3 dB |
Signal to Noise Ratio: |
60 dB at 10 m |
Controls: |
Volume control thumbwheel;3-position selection switch (2.3 MHz, 2.8 MHz, stereo), Off/on slider for power |
Acoustic Output: |
120 dB MAX SSPL90 with 2 cc coupler |
Compatibility: |
Compatible with 2.3 MHz and 2.8 MHz IR transmitters |
Headphone Jack: |
3.5mm stereo |
Ear pads: |
EAR 089 |
Approvals: |
CE, RoHS, FCC, Canada, RCM, VCCI, WEEE |
Warranty: |
5 years (90 days on battery) |