Dimensions:

19” (W) x 1.75” (H) x 8.2” (D)
(48.3 cm x 4.5 cm x 20.8 cm)

Weight:

5.2lb. (2.4 kg)

Color:

Black

Rack Mount:

Single Rack Unit

Power Supply:

International Desktop Supply
Input: 36 W, 110-240 VAC 50-60 Hz
Output: +48VDC, 0.75A center-positive

Power Switch:

Rocker switch with LED

Signal to Noise Ratio:

67 dB (typical)

Modulation:

FM Wideband, +50kHz deviation, 50uS pre-emphasis

Carrier Frequency:

Selectable, 2.3/2.8 or 3.3/3.8MHz

Frequency Response:

40 to 16,000Hz, +1 dB, -3dB, electrical response

Total Harmonic Distortion:

Less than 2%, electrical response

Audio Processor Functions:

DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control

Auto Carrier Shut-Off:

Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage.

Infrared Test LED:

Dual IR LED for receiver testing, monitoring, and audio signal testing.

Audio Input:

(2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power

Dante:

Optional

Internal Test Tone:

400 Hz internal test tone selectable as audio input source for setup and diagnostics

Remote Configuration:

Available through embedded website

Headphone Output:

(2) 1/4″ headphone jacks on front panel for monitoring CH A and CH B audio inputs

Emitter Output Jack:

Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission.

Operating requirements:

0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere

Approvals:

CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI

Warranty:

2 years on Modulator, 90 days on accessories

Dimensions:

7.5” (W) x 1.4” (H) x 3.6” (D)
(19.1 cm x 3.6 cm x 9.1 cm)

Weight:

0.8 lb (362 g)

Color:

Black

Power:

48 VDC supplied by IR M1 via CAT 5e cable.

Coverage Area:

Up to 18,000 square feet in single channel mode

Connectivity:

+48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1.

Operating requirements:

0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere

Approvals:

CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI

Warranty:

2 years on Emitter; 90 days on accessories

Dimensions:

12″L x 6.25″W x 1.5″H (30.48 cm x 15.875 cm x 3.81 cm)

Weight:

13.6 lbs

Color:

Black metal and plastic

Power Supply Input:

120 VAC

Power Supply:

100-240V / 12VDC TFP 043

Unit Capacity:

5 Units

Indicators:

Individual Charging Indicators: Red LEDs

Warranty:

1 year (90 day warranty on cables and power supply)

Approvals:

WEEE, RoHS, CE, FCC, CANADA, RCM, VCCI

Weight:

1.6 oz

Material and Color:

IR Transparent polycarbonate, black

Battery Type:

LiPo

Battery Life:

8 hours

Battery Charger:

CHG 520

Operating Temp:

32-122° F (0-50° C)

Range:

Up to 15,000 sq. ft. in single channel mode with IR T2 transmitter

Operating Frequency:

2.3 MHz or 2.8 MHz or stereo

Frequency Response:

100 Hz to 12 kHz, ± 3 dB

Signal to Noise Ratio:

60 dB at 10 m

Controls:

Volume control thumbwheel;3-position selection switch (2.3 MHz, 2.8 MHz, stereo), Off/on slider for power

Acoustic Output:

120 dB MAX SSPL90 with 2 cc coupler

Compatibility:

Compatible with 2.3 MHz and 2.8 MHz IR transmitters

Headphone Jack:

3.5mm stereo

Ear pads:

EAR 089

Approvals:

CE, RoHS, FCC, Canada, RCM, VCCI, WEEE

Warranty:

5 years (90 days on battery)