Dimensions:

19” (W) x 1.75” (H) x 8.2” (D)
(48.3 cm x 4.5 cm x 20.8 cm)

Weight:

5.2lb. (2.4 kg)

Color:

Black

Rack Mount:

Single Rack Unit

Power Supply:

International Desktop Supply
Input: 36 W, 110-240 VAC 50-60 Hz
Output: +48VDC, 0.75A center-positive

Power Switch:

Rocker switch with LED

Signal to Noise Ratio:

67 dB (typical)

Modulation:

FM Wideband, +50kHz deviation, 50uS pre-emphasis

Carrier Frequency:

Selectable, 2.3/2.8 or 3.3/3.8MHz

Frequency Response:

40 to 16,000Hz, +1 dB, -3dB, electrical response

Total Harmonic Distortion:

Less than 2%, electrical response

Audio Processor Functions:

DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control

Auto Carrier Shut-Off:

Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage.

Infrared Test LED:

Dual IR LED for receiver testing, monitoring, and audio signal testing.

Audio Input:

(2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power

Dante:

Optional

Internal Test Tone:

400 Hz internal test tone selectable as audio input source for setup and diagnostics

Remote Configuration:

Available through embedded website

Headphone Output:

(2) 1/4″ headphone jacks on front panel for monitoring CH A and CH B audio inputs

Emitter Output Jack:

Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission.

Operating requirements:

0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere

Approvals:

CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI

Warranty:

2 years on Modulator, 90 days on accessories

Dimensions:

7.5” (W) x 1.4” (H) x 3.6” (D)
(19.1 cm x 3.6 cm x 9.1 cm)

Weight:

0.8 lb (362 g)

Color:

Black

Power:

48 VDC supplied by IR M1 via CAT 5e cable.

Coverage Area:

Up to 18,000 square feet in single channel mode

Connectivity:

+48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1.

Operating requirements:

0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere

Approvals:

CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI

Warranty:

2 years on Emitter; 90 days on accessories

Receiver Style:

Body-Pack, dual-lens detector, lanyard

Size:

4.1″ L x 2.85″ W x 1.2″ H (104.1 mm x 72.4 mm x 30.4 mm)

Weight:

4.5 oz (127 g) with batteries

Color and Material:

Black

Lanyard:

3 ft (0.91 m), allows receiver to be worn around the neck

Operating Temperature:

-10° C to +50° C

Battery Type:

2 x AA, alkaline (BAT 001-2) or NiMH (BAT 026-2)

Battery Life:

Alkaline: 60 hours, NiMH: 30 hours/charge

Battery Drain:

25 mA, nominal

Charging Contacts:

For use only with CHG 3512

Carrier Frequency:

Channel 1: 2.3 MHz, Channel 2: 2.8 MHz

Channel 3: 3.3 MHz, Channel 4: 3.8 MHz

De-Emphasis:

50 uS

FM Deviation:

±50 kHz

Signal-to-Noise Ratio:

60 dB min.

Squelch:

Receiver squelches (mutes) at 28 dB S/N ratio

Frequency Response:

25 Hz to 16 KHz, +1 dB, -3 dB, electrical response

Total Harmonic Distortion:

Less than 1%, electrical response

Controls:

ON/OFF/VOLUME: combination thumbwheel knob

Channel Selector: four-position rotary switch

Indicators:

Red LED “ON” indicator, flashes to indicate Low battery

Audio Output Jacks:

3.5 mm stereo mini phone jack Accepts 3.5 mm mono or stereo phone plug

Audio Output Power:

15 mW max at 32 Ω

Acoustic Output:

125 dB SSPL90 with HED 021; 110 dB SSPL90 w/ EAR 013

Sensitivity:

Better than 1 nW/cm2 for 40 dB signal-to-noise ratio

Approvals:

CE, FCC, RoHS, WEEE

Warranty:

5 years on receiver, 90 days on accessories

Compatible Headphones/Earphones:

Mono or stereo, 8-32 ohms, 3.5 mm mini phone plug, HED 021, HED 026, EAR 013, EAR 014, EAR 022, NKL 001

Dimensions:

4-7/8″L x 3-7/8″”W x 2″H (12.4 cm L x 9.8 cm W x 5.1 cm)

Shipping Weight:

1.1 lbs (0.5 kg)

Enclosure:

Black, ABS plastic

Charger Power:

Input: 6 VDC, 300mA, Center Positive.

Output: 100mA per bay.

Power Supply:

Williams Sound TFP 041 (US)

Input: 100-240 VAC, 50-60Hz, 0.5-0.3 A

Output: 6 VDC, 1.5 A.

Charging Time:

16 hours nominal *

Unit Capacity:

2 Units

Indicators:

2 Red LEDs – one for each bay. LEDs are lit when charging.

Warranty:

2-year

Approvals:

CE, FCC, RoHS