Product Description
Williams Sound IR SY11 D IR Plus Complete with Dante
IR+ system fully packed with all the tools needed for a large, functioning system.
System Includes:
- IR M1 D
- (2) IR E4
- IDP 008
- (4) RX22s
- (2) CHG 3502
- (2) NKL 001
- (4) HED 021
- (4) BAT 026-2
- MLB 003
- (2) BKT 024
Specs
IR M1
Dimensions: | 19” (W) x 1.75” (H) x 8.2” (D) |
Weight: | 5.2lb. (2.4 kg) |
Color: | Black |
Rack Mount: | Single Rack Unit |
Power Supply: | International Desktop Supply |
Power Switch: | Rocker switch with LED |
Signal to Noise Ratio: | 67 dB (typical) |
Modulation: | FM Wideband, +50kHz deviation, 50uS pre-emphasis |
Carrier Frequency: | Selectable, 2.3/2.8 or 3.3/3.8MHz |
Frequency Response: | 40 to 16,000Hz, +1 dB, -3dB, electrical response |
Total Harmonic Distortion: | Less than 2%, electrical response |
Audio Processor Functions: | DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control |
Auto Carrier Shut-Off: | Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage. |
Infrared Test LED: | Dual IR LED for receiver testing, monitoring, and audio signal testing. |
Audio Input: | (2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power |
Dante: | Optional |
Internal Test Tone: | 400 Hz internal test tone selectable as audio input source for setup and diagnostics |
Remote Configuration: | Available through embedded website |
Headphone Output: | (2) 1/4″ headphone jacks on front panel for monitoring CH A and CH B audio inputs |
Emitter Output Jack: | Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission. |
Operating requirements: | 0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere |
Approvals: | CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI |
Warranty: | 2 years on Modulator, 90 days on accessories |
IR E4
Dimensions: | 7.5” (W) x 1.4” (H) x 3.6” (D) |
Weight: | 0.8 lb (362 g) |
Color: | Black |
Power: | 48 VDC supplied by IR M1 via CAT 5e cable. |
Coverage Area: | Up to 18,000 square feet in single channel mode |
Connectivity: | +48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1. |
Operating requirements: | 0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere |
Approvals: | CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI |
Warranty: | 2 years on Emitter; 90 days on accessories |
WIR RX22
Receiver Style: | Body-Pack, dual-lens detector, lanyard |
Size: | 4.1″ L x 2.85″ W x 1.2″ H (104.1 mm x 72.4 mm x 30.4 mm) |
Weight: | 4.5 oz (127 g) with batteries |
Color and Material: | Black |
Lanyard: | 3 ft (0.91 m), allows receiver to be worn around the neck |
Operating Temperature: | -10° C to +50° C |
Battery Type: | 2 x AA, alkaline (BAT 001-2) or NiMH (BAT 026-2) |
Battery Life: | Alkaline: 60 hours, NiMH: 30 hours/charge |
Battery Drain: | 25 mA, nominal |
Charging Contacts: | For use only with CHG 3512 |
Carrier Frequency: | Channel 1: 2.3 MHz, Channel 2: 2.8 MHz Channel 3: 3.3 MHz, Channel 4: 3.8 MHz |
De-Emphasis: | 50 uS |
FM Deviation: | ±50 kHz |
Signal-to-Noise Ratio: | 60 dB min. |
Squelch: | Receiver squelches (mutes) at 28 dB S/N ratio |
Frequency Response: | 25 Hz to 16 KHz, +1 dB, -3 dB, electrical response |
Total Harmonic Distortion: | Less than 1%, electrical response |
Controls: | ON/OFF/VOLUME: combination thumbwheel knob Channel Selector: four-position rotary switch |
Indicators: | Red LED “ON” indicator, flashes to indicate Low battery |
Audio Output Jacks: | 3.5 mm stereo mini phone jack Accepts 3.5 mm mono or stereo phone plug |
Audio Output Power: | 15 mW max at 32 Ω |
Acoustic Output: | 125 dB SSPL90 with HED 021; 110 dB SSPL90 w/ EAR 013 |
Sensitivity: | Better than 1 nW/cm2 for 40 dB signal-to-noise ratio |
Approvals: | CE, FCC, RoHS, WEEE |
Warranty: | 5 years on receiver, 90 days on accessories |
Compatible Headphones/Earphones: | Mono or stereo, 8-32 ohms, 3.5 mm mini phone plug, HED 021, HED 026, EAR 013, EAR 014, EAR 022, NKL 001 |
CHG 3502
Dimensions: | 4-7/8″L x 3-7/8″”W x 2″H (12.4 cm L x 9.8 cm W x 5.1 cm) |
Shipping Weight: | 1.1 lbs (0.5 kg) |
Enclosure: | Black, ABS plastic |
Charger Power: | Input: 6 VDC, 300mA, Center Positive. Output: 100mA per bay. |
Power Supply: | Williams Sound TFP 041 (US) Input: 100-240 VAC, 50-60Hz, 0.5-0.3 A Output: 6 VDC, 1.5 A. |
Charging Time: | 16 hours nominal * |
Unit Capacity: | 2 Units |
Indicators: | 2 Red LEDs – one for each bay. LEDs are lit when charging. |
Warranty: | 2-year |
Approvals: | CE, FCC, RoHS |