Product Description
Williams Sound IR ME1 D IR Plus Combo with Dante
IR+ system with Dante features with emitter and ADA sign
System Includes:
- IR M1 D
- IR E4
- IDP 008
Specs
IR M1
Dimensions: | 19” (W) x 1.75” (H) x 8.2” (D) |
Weight: | 5.2lb. (2.4 kg) |
Color: | Black |
Rack Mount: | Single Rack Unit |
Power Supply: | International Desktop Supply |
Power Switch: | Rocker switch with LED |
Signal to Noise Ratio: | 67 dB (typical) |
Modulation: | FM Wideband, +50kHz deviation, 50uS pre-emphasis |
Carrier Frequency: | Selectable, 2.3/2.8 or 3.3/3.8MHz |
Frequency Response: | 40 to 16,000Hz, +1 dB, -3dB, electrical response |
Total Harmonic Distortion: | Less than 2%, electrical response |
Audio Processor Functions: | DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control |
Auto Carrier Shut-Off: | Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage. |
Infrared Test LED: | Dual IR LED for receiver testing, monitoring, and audio signal testing. |
Audio Input: | (2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power |
Dante: | Optional |
Internal Test Tone: | 400 Hz internal test tone selectable as audio input source for setup and diagnostics |
Remote Configuration: | Available through embedded website |
Headphone Output: | (2) 1/4″ headphone jacks on front panel for monitoring CH A and CH B audio inputs |
Emitter Output Jack: | Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission. |
Operating requirements: | 0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere |
Approvals: | CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI |
Warranty: | 2 years on Modulator, 90 days on accessories |
IR E4
Dimensions: | 7.5” (W) x 1.4” (H) x 3.6” (D) |
Weight: | 0.8 lb (362 g) |
Color: | Black |
Power: | 48 VDC supplied by IR M1 via CAT 5e cable. |
Coverage Area: | Up to 18,000 square feet in single channel mode |
Connectivity: | +48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1. |
Operating requirements: | 0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere |
Approvals: | CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI |
Warranty: | 2 years on Emitter; 90 days on accessories |