Product Description
Williams Sound Induction Loop Body-pack Receiver
Simple and convenient to use, this induction loop receiver is designed for use in induction-looped areas by listeners who do not wear T-coil-equipped hearing aids. Compatible with all IEC60118-4 compliant induction loop systems. 0.2 lbs.
No earphones, No batteries.
Features
- Operates up to 200 hours with two AA alkaline batteries
- Simple to use -- on/off volume control
- Internal tone control
- 3.5mm stereo jack
- Compatible with Williams Sound 2- and 12-bay chargers (CHG 3502 and CHG 3512). Chargers sold separately.
- 5-year warranty
Specifications
Plr bp1 architectural and engineering specifications
The receiver shall have a 3.5 mm headphone jack, on/off volume control. There shall be a tone control inside the battery compartment. It shall have a green power LED which will blink when the battery is low.
The receiver shall be covered under a 5 years parts and labor warranty.
Specs
Dimensions: | 4.1"H x 2.85"W x 1.38"D (104 mm H x 72 mm W x 35 mm D). |
Weight: | 4.6 oz (130 g) with batteries, 2.6 oz (73 g) without batteries. |
Color/Material: | Black ABS/polycarbonate molded plastic case. |
Battery Type: | (2) AA (1.5VDC) Alkaline or NiMH (rechargeable). |
Battery Life: | Up to 200 hours with Alkaline batteries. |
LED Indicator: | Green LED indicates power on, flashes when batteries are low. |
Headphone Jack: | 3.5mm stereo TRS jack works with mono or stereo headphones. |
Volume control: | External switched thumb wheel controls power on/off and volume level. |
Tone control: | Rotary control inside battery compartment (1kHz reference at 400mA/m input with Tone at mid position) |
Induction Coil: | Maximum reception: receiver oriented vertically |
Power Output: | 35mW (max) into 33 ohms mono impedance |
THD: | <2% |
Frequency Response: | 300Hz to 10KHz, -6dB |