Product Description
Williams Sound Digi-Wave 400 Series Tour Guide System for One Guide and up to 20 Listeners
Description
Digi-Wave 400 Series Tour Guide System for one guide and up to 20 listeners.
System includes
(1) DLT 400 transceiver
(20) DLR 400 ALK receivers
(1) MIC 144 headset microphone
(20) EAR 022 surround earphones
(20) BAT 010-2 AAA alkaline batteries
(1) CCS 056 26 system carry case
(1) CCS 061 GR grey silicone skin
Specifications
Bat 010-2
Alkaline, 1.2 Volt
Ccs 056 26
Interior Dimensions | 13.0” W x 18.0” L x 6.7”H (33 cm W x 46 cm L x 17 cm H) |
Exterior Dimensions | 15.7” W x 19.7” L x 7.2” H (40 cm W x 50 cm L x 18 cm H) |
Lid Inner Depth | 1.5” (4 cm) |
Bottom Inner Depth | 5.2” (13 cm) |
Approx. weight (empty) | 6.6 lbs (3 kg) |
Material | Copolymer |
Minimum Temperature | -40ºF (-40ºC) |
Maximum Temperature | 160ºF (71.1ºC) |
Dlr 400 alk
Dimensions: | 2.36" W x 3.54" H x 0.63" D (60 mm x 90 mm x 16 mm) |
Weight: | 1.7 oz. (47 g) without batteries. |
Frequency Band: | 2.4 GHz (ISM band) |
Modulation: | FSK |
Case Material: | Black ABS Plastic |
Battery Type: | 2 x AAA Alkaline Batteries |
Battery Life: | Alkaline Disposable (BAT 010-2): Up to 30 hrs |
Power Save: | Auto Sleep Mode after 5 minutes of no RF signal from compatible devices |
Audio Frequency Response: (-3dB level) |
Intercom Mode: 100 – 7,300 Hz Interpretation and other modes: 100-11,200 Hz |
SNR: | 74 dB (A-weighted) |
THD: | 0.1% (typical) |
Antenna: | Internal |
Range: | Up to 900 ft (274 m) (depending upon environmental conditions) |
Headphone Audio Output: | 3.5 mm TRRS jack with mono output for headphones, earphones, or neckloop 27 mW maximum @32 ohms |
Display: | LCD shows status: Battery Level, RSSI, Group/Channel # |
Temp. Range: | 14° – 113°F (-10° to 45°C) |
Compatible Units | DLT 400, DLT 300 |
Approvals: | FCC, Industry Canada, RoHS 3, CE, WEEE, RCM, ANATEL, KC, Giteki |
Warranty: | 2 years parts and labor (90 days on accessories) |
Dlt 400
Dimensions | 4.22"W x 2.60"H x 0.50"D (107.3 mm x 66 mm x 12.6 mm) |
Weight | 3.3 oz (94 g) including battery |
Color | Black/Silver (Front/Back) |
Case Material | Black ABS plastic |
Battery type | Lithium Polymer with smart charge built into transceiver; 1800 mAH |
Battery life | Up to 16 hrs talk time per charge@ 1ch Tx and 1ch Rx |
Power Save | Auto Sleep Mode after 5 minutes of no RF signal from compatible devices |
Charge time | 5 hrs. approx. |
Operating frequencies | 2.4 GHz (ISM band); 2402 – 2476 MHz FHSS |
Audio Frequency response (-3dB Level) |
Intercom Mode: 100 - 7,200 Hz Other Modes: 100 - 11,500 Hz |
SNR | 73 dB (A-weighted, default Rx volume with mic input ) |
THD | 0.1 % (Default Volume, 1kHz) |
Microphone input | Internal microphone (disabled when MIC jack engaged) and 3.5 mm phone jack (sleeve) with electret microphone bias, adjustable gain with 63dB range. |
Line Input | USB-C, Adjustable level |
Audio Output | Headphone: 3.5 mm TRRS headphone jack; 25 mW, R 32 ohms Line: USB-C, Adjustable level |
Audio Output | Max SSPL 90 111.8dB (EAR 013), 116.8dB (EAR 041) |
Range | Up to 900 ft (274 m) (depending upon environmental conditions) |
Modulation | FSK |
RF Output | 19 dBm Typical |
Security | 87 bit encryption (300 Series Compatiable), 87+128 bit Encryption, Encrpytion PIN, Lock for settings |
Side tone | -6 dB below volume, tone variation (Off, Low and High settings available) |
Indicators | OLED |
LEDs | Red LED around Talk button when enabled; Bi-color, changing green and red LED at top |
Charging Connectors | USB-C; Two contacts for use with CHG 412 |
Compatible Receiver | DLR 400 RCH, DLR 400 ALK, DLT 300 with some limitations and DLR 360 with some limitations |
Operating Tempurature Range | 14º to 113ºF (-10º to 45ºC) |
Approvals | FCC, Industry Canada, CE, RoHS 3, WEEE, RCM, ANATEL, KC, Giteki |
Warranty | 2 years parts and labor (90 days on accessories); 6 months on internal battery |
Ear 022
Style |
Around-ear speaker |
Plug |
3.5mm mono |
Cord |
39" |
Driver Size |
23 mm |
Nominal Impedance |
32Ω |
Freq. Response |
20 - 20kHz |
Weight |
15g |
Max Power Input |
30 mW |
Sensitivity |
118 dB @ 1kHz |