Product Description
Williams Sound DL102 SY1 Counter Loop System
The DL102 Loop amplifier provides a practical solution for a user to hear with their T-coil enabled hearing device in small areas such as counters and service desks.
Audio is wired into the DL102 amplifier via a line-level input or microphone. Audio is fed from the amplifier through the loop wire in the area where a T-coiled hearing device can pick-up the audio.
With no direct connection between the user and service personnel, users can hear effectively when using the T-coil in their customized hearing devices.
This loop system is supplied with a loop pad and a spool of wire.
System includes
DL102 amplifier
Power supply
AC line cord
Loop notice stickers
Set of adhesive cable clips
Surface Microphone
PLW 037 (120ft Spool of wire)
PLM 001 - Loop Pad
Specifications
Dl 102 sy1
| Audio Input: | 3 (1 microphone or line input, isolated line input, Mic) | 
| Connector Type: | 3.5mm jack, Mic-2 pole line in, 3 pole line in, Mic in | 
| Power Supply: | 12V DC 1.5 A output | 
| Power Voltage: | 100-240VAC, 50/60Hz - 2.0A Input | 
| Dynamic Range: | > 60 dB | 
| THD: | THD+N < 0.5% - 1kHz | 
| Amplifier Type: | Constant current | 
| Loop Resistance: | 0.1 Ω to 1.0 Ω | 
| Current Output: | 2A RMS at 1kHz (2.8 APK) | 
| Protection: | Thermal, short-circuit and start | 
| Dimensions: | 3.9” x 2.3” x 1” (100mm x 60mm x 25mm) | 
| Amplifier Weight: | 0.48 lbs (218 g) | 
Plm 001
| Lead Wire Length | 16 ft / 5 m | 
| DC Resistance | 1.3 Ohms | 
| Weight | 0.5 lbs / 225 g | 
| Pad | 14 in / 0.4 m square | 
| Wire In Pad | 10-turn loop | 
Plw 037
| Length | 120ft | 
| Spool Dimensions: | 6.5"Dia | 
| Spool Weight: | 9.8 lbs | 
| Color/Material: | White | 
 
 
             
             
             
             
           
           
           
       
           
                   
           
                   
          