Product Description
Visual Productions RDMSPLITTER (TB) DIN Rail Mounted DMX+RDM Splitter/Booster
Overview
The widely adopted data protocol in the realm of lighting equipment is DMX-512. While it has enjoyed considerable success, it does come with a few limitations. Notably, it restricts the maximum number of connected devices to 32, all of which must be arranged in a bus-topology configuration, with a cable passing through each device. Additionally, the length of a DMX cable should not exceed 300 meters.
Addressing these inconveniences, the RdmSplitter from Visual Productions serves as an effective solution. This splitter takes a DMX signal and redistributes it through its 6 DMX output ports, enabling a more efficient star-topology cable layout. Each output port has the capacity to drive an additional 32 devices. Furthermore, the splitter can also serve as a signal booster, as each port supports another 300-meter long connection.
Notably, the RdmSplitter incorporates RDM compatibility, a protocol that facilitates two-way communication within a DMX infrastructure. RDM offers the advantages of automatic addressing and enables fixtures to provide real-time status information back to the lighting controller.
Features
- Receive fixture feedback
- Prevent ground loops
- Make cable runs easier
- Extend the DMX network
Specifications
- 6 Outputs
- Optical Isolation (individual per port)
- USITT DMX512-A (ANSI E1.11)
- RDM (ANSI E1.20)
- DIN Rail mounting
- Power consumption 9-24V DC 500mA power input (optional external PSU)
- Dimensions 105 x 86 x 60 mm (4.1 x 3.4 x 2.4 inches)
- Weights 120 gram (0.26 lbs)
- Screw terminals
- Operating temperature -20°C to +50°C (-4°F to 122°F) Operating relative humidity 10% to 80% non-condensing
- Compliance EN55103-1 EN55103-2
