Product Description
TOA F-2352C 30W 5" Co-axial Ceiling Speaker
The F-2352C speaker is a flush-mounted ceiling speaker that offers a wide frequency range and high quality sound performance, and features a 2-way co-axial speaker configuration. Use of the supplied and optional mounting hardware permits versatile mounting to match a wide range of applications and installation locations.
Its bass-reflex speaker system designed to provide smooth sound delivery with high power handling capability. Its wide-dispersion flush-mount ceiling speaker design employs unique acoustic construction to realize a wide area of coverage. Uniform sound output levels are achievable not only directly under the speaker, but also over a wide radius. Because the speaker provides both low- and high-impedance operating capability, it can be used in many different applications. A front panel-mounted input selector switch permits easy verification and change of current impedance/power settings, even after installation. It can be quickly and accurately mounted to ceilings and the rotating front grille can be installed/removed quickly and easily. It has an attractive exterior design specially created by an interior designer to blend naturally with any architectural space. Optional mounting hardware permits exposed installation or installation in weak ceiling panels.
Enclosure |
Bass reflex type |
Rated Input |
30 W (High Impedance) |
Power Handling Capacity |
Continuous pink noise: 60 W (8 Ω) Continuous program: 120 W (8 Ω) |
Impedance |
100 V line: 330 Ω (30 W), 1 kΩ (10 W), 3.3 kΩ (3 W), 10 kΩ (1 W) 70 V line: 170 Ω (30 W), 330 Ω (15 W), 1 kΩ (5 W), 3.3 kΩ (1.5 W), 10 kΩ (0.5 W) 25 V line: 170 Ω (3.7 W), 330 Ω (1.9 W), 1 kΩ (0.6 W), 3.3 kΩ (0.2 W), 10 kΩ (0.06 W) 8 Ω |
Sound Pressure Level |
90 dB (1 W, 1 m) |
Frequency Response |
70 Hz - 20 kHz (-10 dB), 50 Hz - 20 kHz (-20 dB) at installation in 1/2 free sound field (Measured by installing the unit in the center of a ceiling.) |
Speaker Component |
High frequency: Balanced dome-type, Low frequency: 12 cm cone-type |
Mounting Hole |
φ200 mm (Maximum ceiling thickness: 37 mm) |
Input Terminal |
Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) |
Usable Cable |
Solid copper wire: φ0.5 - φ1.6 mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5 m㎡ (equivalent to AWG No. 24 - 14) |
Finish |
Enclosure: Steel plate, plating Baffle: Fire-resistant ABS resin (resin material grade: UL-94 V-0), black Rim: Fire-resistant ABS resin (resin material grade: UL-94 V-0), white, paint Punched net: Steel plate, white, paint |
Dimensions |
φ230 × 229 (D) mm |
Weight |
3.7 kg (including mounting accessories) |
Accessory |
Panel ……1, Ceiling reinforcement ring ……1, Safety wire ……1, Paper pattern …1 |
Option |
Anchor hanging bracket: HY-AH1, Back can: HY-BC1, Tile bar bridge: HY-TB1, Trim ring: HY-TR1, Q-HY-BC25W Surface Mount White Back Can |
Other Details
Limited Product Warranty - United States
PRODUCTS ARE ONLY INTENDED FOR COMMERCIAL (NON-CONSUMER) USES AND APPLICATIONS
TOA ELECTRONICS, INC. ("TEI") warrants Products purchased in the 50 United States of America and the District of Columbia against defects in material or workmanship, as follows:
Audio Products: Five years
Intercom Products: Two years
For warranty coverage of products of third parties resold through TEI, please contact the Original Equipment Manufacturer (OEM) or third party vendor directly.
Exceptions to Warranty Coverage
All Product Categories
Rust and/or corrosion of any Product and/or associated mounting hardware. This exception also applies to all Products which are recommended for outdoor applications.
Batteries
Battery failures: TOA will replace failed batteries within 60 days from the date of Product purchase. Purchaser should contact a TOA Authorized Reseller to arrange for the replacement.
Warranty Exclusions
Cases and case panels, grilles, lost or missing knobs, meter movements, wooden parts, damage caused by improper electrical service (such as power surge, brownout, operation on incorrect power supply) and shipping damage.
All claims under this Limited Product Warranty must be for covered problems and must be made during the applicable warranty period. To make a claim, Purchaser must return the Product, freight prepaid, to TEI's Service Center under a Return Merchandise Authorization issued by TEI in accordance with its then currently published procedure. The Product must be returned in either its original carton or a similar package affording an equal degree of protection. TEI will return the repaired Product freight prepaid to Purchaser. Unless the Product is covered by the Advance Replacement Policy then currently in effect by TEI, if any, TEI is not obligated to provide Purchaser with a substitute product during the warranty period or at any other time.
TERMS AND CONDITIONS
1. INVESTIGATION:
TEI will reasonably investigate the Purchaser's claim.
If after investigation TEI determines that the reported problem was not covered by this warranty, Purchaser will pay TEI for the cost of investigating the problem at TEI's then prevailing per incident testing fee and all shipping costs incurred by TEI.
No repair or replacement of any Product or part thereof will extend the applicable warranty period for the entire Product. The specific warranty for any repair will extend for a period of ninety (90) days following the repair or the remaining warranty period for the Product, whichever is longer.
2. EXCLUSIVE REMEDY; ACCEPTANCE:
Purchaser's exclusive remedy and TEI's sole obligation under this warranty is to supply (or pay for) all labor necessary to repair any Product found to be defective in material or workmanship within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts. If repair or replacement fails to remedy the problem, then and only in such event will TEI refund to Purchaser the purchase price for the Product. Purchaser's failure to make a claim as provided herein or continued use of the Product will constitute an unqualified acceptance of the Product and a waiver by Purchaser of all warranty claims with respect thereto.
3. EXCEPTIONS TO LIMITED WARRANTY:
In addition to the specific exceptions to warranty coverage noted herein, TEI has no liability or obligation to Purchaser under this warranty with respect to any Product which is subjected to any of the following: abuse, improper use, negligence, accident, modification, failure of the end-user to follow the operating procedures outlined in the user manual for the Product, failure of the end-user to follow the maintenance procedures in the service manual for the Product where a schedule is specified for regular replacement or maintenance or cleaning of certain parts (based on usage) and the end-user has failed to follow such schedule; attempted repair by non-qualified personnel; operation of the Product outside of the published environmental and electrical parameters, or if the Product's original identification (trademark, serial number) markings have been defaced, altered, or removed. TEI expressly excludes from warranty coverage Products sold by TEI "AS IS" and/or "WITH ALL FAULTS" and consumable items such as fuses and, except as noted above, batteries. All software and accompanying documentation furnished with, or as part of the Product is furnished AS IS and without any warranty of any kind, except as expressly provided in any documentation or license agreement furnished with the Product.
4. AVOIDING DATA LOSS:
Purchaser is solely responsible for maintaining any backup which may be necessary to replace any data stored in the Product and which could be lost or damaged from any cause.
5. PROOF OF PURCHASE:
Purchaser's dated bill of sale for the Product must be retained as evidence of the date of purchase and to establish warranty eligibility.
6. PRODUCT REGISTRATION:
Registration of the Product or of this warranty is voluntary and Purchaser's failure to register will not diminish any rights available hereunder.
DISCLAIMER OF WARRANTY
EXCEPT FOR THE FOREGOING WARRANTY, TEI HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES FOR THE PRODUCT, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY WARRANTY WITH REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF THE UNIFORM COMMERCIAL CODE AND/OR IN ANY OTHER COMPARABLE STATE STATUTE. TEI HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY THAT THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-TEI PRODUCTS ANYONE MAY CHOOSE TO CONNECT TO THE PRODUCT.
LIMITATION OF LIABILITY
THE LIABILITY OF TEI, IF ANY, AND PURCHASER'S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND WHATSOEVER REGARDING THE PRODUCT, REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT, WILL NOT BE GREATER THAN THE ACTUAL PURCHASE PRICE OF THE PRODUCT WITH RESPECT TO WHICH SUCH CLAIM IS MADE. IN NO EVENT WILL TEI BE LIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION, REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS OR FOR ANY OTHER REASON WHATSOEVER REGARDING THE PRODUCT.
For TEI'S Service Facility in the United States please contact: TEI Product Support Group at 800-733-4748 or by email at: techsupport@toaelectronics.com.
Product Videos