Product Description
Tascam US-4X4HR Desktop 4x4 USB Type-C Audio/MIDI Interface
4 XLR mic inputs and 4 TRS line inputs (IN 1-2 guitar input support) audio interface with implemented MIDI IN/OUT ports. Equipped loopback function and OBS support makes this interface an excellent choice for podcasts and live streaming. The new US-4x4HR offers simple and intuitive operation, sophisticated looks, a rich assortment of software bundles, and improved audio performance with 192 kHz support, thanks to the newly enhanced audio circuit.
Features
- 4-in/4-out USB audio interface
- Supports up to 24-bit/ 192kHz audio formats
- Improved TASCAM driver with selectable buffer size from 4 samples provides low-latency and stability (Windows: TASCAM native driver)
- 4 XLR/TRS combo inputs equipped with Ultra-HDDA mic preamps and +48V phantom power
- Combo TRS line inputs with guitar input support on IN1-2
- TRS line outputs 1-2/3-4
- Two headphone outputs
- Equipped with MIDI IN/OUT terminals
- USB Type-C connection (USB Type-A to Type-C cable included)
- Powered by USB bus power
- * 48V phantom power requires PC power supply via USB-C connection.
- Zero-latency direct monitoring
- Compatible with iPad and other iOS devices
- Extensive line-up of bundled software
- Steinberg Cubase LE, Cubasis LE 3
- IK Multimedia Sample Tank 4 SE
- Antares AUTO-TUNE UNLIMITED (available free of charge up to 3 months)
- Stereo/mono selectable loopback function (Windows, Mac, iOS, iPad OS)
- OBS support
Included
- US-4x4HR
- AC adapter PS-P1220E
- USB cable (Type-A to Type-C)
- DAW software installation guide
- DAW plug-in software installation guide set
- Owner's manual(warranty card included)
Specs
Sampling frequency | 44.1k/48k/88.2k/96k/176.4k/192k Hz |
Quantization bit rate | 24bit |
Analog audio inputs |
|
MIC IN | IN 1 / IN 2, IN 3 / IN 4 |
Connector | XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED |
Input impedance | 2.2k ohms |
Maximum input level | +9dBu (2.183Vrms) |
Gain | 56dB |
INST IN | IN 1 / IN 2 |
Connector | 6.3mm(1/4")TS-jack(T:HOT, S:GND), UNBALANCED |
Input impedance | 1M ohms or more |
Maximum input level | +10dBV(3.162Vrms) |
Gain | 56dB |
LINE IN | IN 1 / IN 2, IN 3 / IN 4 |
Connector | 6.3mm(1/4")TRS-jack(T:HOT, R:COLD, S:GND), BALANCED |
Input impedance | 10k ohms |
Maximum input level | +20dBu(7.746Vrms) |
Gain | 56dB |
Analog audio outputs |
|
LINE OUT | 1-2, 3-4 |
Connector | 6.3mm(1/4")TRS-jack(T:HOT, R:COLD, S:GND), BALANCED |
Output impedance | 210 ohms |
Nominal output level | +4dBu (1.228Vrms) |
Maximum output level | +20dBu (7.746Vrms) |
PHONES |
|
Connector | 6.3mm(1/4") stereo phone jack |
Maximum output level | 45mW+45mW or more |
MIDI IN /OUT |
|
Connector | Din 5-pin |
Format | Standard MIDI format |
USB |
|
Connector | USB Type-C |
Format | USB2.0 HIGH SPEED (480Mbps) |
Power |
|
When connected PC | USB bus powered |
When connected iOS/iPadOS | AC Adapter (TASCAM PS-P1220E, included) |
Power consumption | 2.25W |
Dimensions | 296(W) × 65(H) × 160(D)mm (including protrusions) |
Weight | 3.53lb (1.6kg) |
Operating temperature | 5 to 35°C |
Accessories | AC adapter(TASCAM PS-P1220E), USB cable (Type-A to Type-C), Set of DAW software installation guides, Set of DAW plug-in software installation guides, Owner's Manual (including warranty) |
Audio Performance
Mic amp EIN (equivalent input noise) | -128dBu or lower |
Frequency response |
|
MIC / LINE IN |
|
44.1k/48k Hz | 20Hz to 20kHz, +0dB/-0.4dB(JEITA) |
88.2k/96k Hz | 20Hz to 40kHz, +0dB/-0.4dB(JEITA) |
LINE OUT |
|
44.1k/48k Hz | 20Hz to 40kHz, +0.2dB/-0.1dB(JEITA) |
88.2k/96k Hz | 20Hz to 40kHz, +0.2dB/-0.4dB(JEITA) |
THD + N | 0.0013% (MIC IN, 1kHz sine wave, -5dBFS input, GAIN knob at minimum, 20kHz SPCL LPF) |
0.0011% (LINE IN, 1kHz sine wave, -5dBFS input, GAIN knob at minimum, 20kHz SPCL LPF) | |
0.0012% (LINE OUT, 1kHz sine wave, -4dBFS input, MONITOR knob at maximum, 20kHz SPCL LPF) | |
S/N ratio | 110dB (MIC IN, GAIN knob at minimum, 20kHz SPCL LPF+A-Weight) |
108dB (LINE IN, GAIN knob at minimum, 20kHz SPCL LPF+A-Weight)) | |
110dB (LINE OUT, MONITOR knob at maximum, 20kHz SPCL LPF+A-Weight) | |
Crosstalk | 95dB or more (MIC/LINE IN to LINE OUT, 1kHz sine wave, GAIN knob at minimum) |
Computer System Requirements
Windows
Compatible computers | Windows computer with a USB 2.0 (or higher) port |
CPU type/speed | 2GHz or faster dual core processor (x86) |
Memory | 2GB or more |
Driver | ASIO2.0, WDM, MIDI |
Mac
Compatible computers | Mac with a USB 2.0 (or higher) port |
CPU type/speed | 2GHz or faster dual core processor |
Memory | 2GB or more |
Driver | Core Audio, Core MIDI |
iOS/iPadOS device
Driver | Core Audio |