Product Description
Tascam US-2X2HR Desktop 2x2 USB Type-C Audio/MIDI Interface
2 combo jack mic/line inputs with guitar input support audio interface with implemented MIDI IN/OUT ports. Equipped loopback function and OBS support makes this interface applicable for podcasts and live streaming. The new US-2x2HR offers simple and intuitive operation plus sophisticated looks, a rich assortment of software bundles, and improved audio performance with 192 kHz support, thanks to the newly improved audio circuit.
Features
- 2-in/2-out USB audio interface
- Improved TASCAM driver with selectable buffer size from 4 samples provides low-latency and stability (Windows: TASCAM native driver)
- Supports up to 24-bit/192 kHz audio formats
- 2 Combo (XLR) combo inputs equipped with Ultra-HDDA mic preamps and +48V phantom power
- 2 Combo (TRS) line inputs with guitar input support
- TRS line output 1-2
- Headphone output
- Equipped with MIDI IN/OUT terminals
- USB Type-C connection (USB Type-A to Type-C cable included)
- Powered by USB bus power
- Zero-latency direct monitoring
- Compatible with iPad and other iOS devices
- Extensive line-up of bundled software
- Steinberg Cubase LE, Cubasis LE 3
- IK Multimedia Sample Tank 4 SE
- Antares AUTO-TUNE UNLIMITED (available free of charge up to 3 months)
- Stereo/mono selectable loopback function (Windows, Mac, iOS, iPad OS)
- OBS support
Included
- US-2x2HR
- USB cable (Type-A to Type-C)
- DAW software installation guide
- DAW plug-in software installation guide set
- Owner's manual(warranty card included)
Specs
| Sampling frequency | 44.1k/48k/88.2k/96k/176.4k/192k Hz |
| Quantization bit rate | 24bit |
| Analog audio inputs |
|
| MIC IN | IN 1 / IN 2 |
| Connector | XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED |
| Input impedance | 2.2k ohms |
| Maximum input level | +9dBu (2.183Vrms) |
| Gain | 56dB |
| INST IN | IN 1 / IN 2 |
| Connector | 6.3mm(1/4")TS-jack(T:HOT, S:GND), UNBALANCED |
| Input impedance | 1M ohms or more |
| Maximum input level | +10dBV(3.162Vrms) |
| Gain | 56dB |
| LINE IN | IN 1 / IN 2 |
| Connector | 6.3mm(1/4")TRS-jack(T:HOT, R:COLD, S:GND), BALANCED |
| Input impedance | 10k ohms |
| Maximum input level | +20dBu(7.746Vrms) |
| Gain | 56dB |
| Analog audio outputs |
|
| LINE OUT | 1-2 |
| Connector | 6.3mm(1/4")TRS-jack(T:HOT, R:COLD, S:GND), BALANCED |
| Output impedance | 210 ohms |
| Nominal output level | +4dBu (1.228Vrms) |
| Maximum output level | +20dBu (7.746Vrms) |
| PHONES |
|
| Connector | 6.3mm(1/4") stereo phone jack |
| Maximum output level | 18mW+18mW or more |
| MIDI IN /OUT |
|
| Connector | Din 5-pin |
| Format | Standard MIDI format |
| USB |
|
| Connector | USB Type-C |
| Format | USB2.0 HIGH SPEED (480Mbps) |
| Power |
|
| When connected PC | USB bus powered |
| When connected iOS/iPadOS | AC Adapter (TASCAM PS-P520E, sold separately) |
| Power consumption | 1.75W |
| Dimensions | 186(W) × 65(H) × 160(D)mm (including protrusions) |
| Weight | 2.43lb (1.1kg) |
| Operating temperature | 5 to 35°C |
| Accessories | USB cable (Type-A to Type-C), Set of DAW software installation guides, Set of DAW plug-in software installation guides, Owner's Manual (including warranty) |
Audio Performance
| Mic amp EIN (equivalent input noise) | -128dBu or lower |
| Frequency response |
|
| MIC / LINE IN |
|
| 44.1k/48k Hz | 20Hz to 20kHz, +0dB/-0.4dB(JEITA) |
| 88.2k/96k Hz | 20Hz to 40kHz, +0dB/-0.4dB(JEITA) |
| LINE OUT |
|
| 44.1k/48k Hz | 20Hz to 40kHz, +0.2dB/-0.1dB(JEITA) |
| 88.2k/96k Hz | 20Hz to 40kHz, +0.2dB/-0.4dB(JEITA) |
| THD + N | 0.0013% (MIC IN, 1kHz sine wave, -5dBFS input, GAIN knob at minimum, 20kHz SPCL LPF) |
| 0.0011% (LINE IN, 1kHz sine wave, -5dBFS input, GAIN knob at minimum, 20kHz SPCL LPF) | |
| 0.0012% (LINE OUT, 1kHz sine wave, -4dBFS input, MONITOR knob at maximum, 20kHz SPCL LPF) | |
| S/N ratio | 110dB (MIC IN, GAIN knob at minimum, 20kHz SPCL LPF+A-Weight) |
| 108dB (LINE IN, GAIN knob at minimum, 20kHz SPCL LPF+A-Weight)) | |
| 110dB (LINE OUT, MONITOR knob at maximum, 20kHz SPCL LPF+A-Weight) | |
| Crosstalk | 95dB or more (MIC/LINE IN to LINE OUT, 1kHz sine wave, GAIN knob at minimum) |
Computer System Requirements
Windows
| Compatible computers | Windows computer with a USB 2.0 (or higher) port |
| CPU type/speed | 2GHz or faster dual core processor (x86) |
| Memory | 2GB or more |
| Driver | ASIO2.0, WDM, MIDI |
Mac
| Compatible computers | Mac with a USB 2.0 (or higher) port |
| CPU type/speed | 2GHz or faster dual core processor |
| Memory | 2GB or more |
| Driver | Core Audio, Core MIDI |
iOS/iPadOS device
| Driver | Core Audio |