Product Description
Tascam BO-32DE 32 Channel Euroblock to D-Sub Input Adaptor for Professional Installations
The TASCAM BO-32DE is a rugged, rack-mounted audio adapter designed for professional installation. 32 front-panel Eruoblock connectors are internally bridged to four D-Sub output connectors on the rear panel, providing fast and easy I/O and inter-connectivity between CD players, Digital Audio players, Mic Preams, Zone Mixers, Distribution Amplifiers Audio over IP Converters and more.
32 channels from 25-pin D-sub connectors can be transmitted to Euroblock terminals
Euroblock terminals are the same for both input and output, so the 32 channels can be assigned freely as inputs or outputs in each 8 channel. The numbers of inputs and outputs can be set flexibly according to the needs of the system. For example, the unit could be set to have all 32 channels as inputs, 24 channels as inputs and 8 as outputs, or 16 channels each of inputs and outputs.
Included Euroblock plugs have tabs and cable band kit
The included Euroblock plugs have tabs. Attaching the signal wires with wire bands minimizes stress on them during connection and disconnection.
The 25-pin D-sub connectors use TASCAM pin assignments that are compliant with AES59-2012
Rackmount ears can be attached forward or backward allowing you to install the unit freely
Rackmount ears can also be removed
The unit can be mounted in a rack facing forward or backward by changing the direction that the rack-mount ears are attached to it. The rackmount ears can also be removed when using the unit placed on a tabletop.
Compact 1U size with a depth of 45 mm
Thanks to the compact size, including a depth of only 45 mm, this breakout box can even be mounted in the back of a rack case.
Spec description
| BO-32DE | BO-16DX/IN | BO-16DX/OUT |
FRONT | |
Connectors | Euroblock (Balanced) 3.81mm pitch × 16 (32ch) | XLR-3-31 (1:GND, 2:HOT, 3:COLD) × 16 | XLR-3-32 (1:GND, 2:HOT, 3:COLD) × 16 |
REAR | |
Connectors | D-sub 25pin female × 4 | D-sub 25pin female × 2 |
Attachment screws | No.4-40 UNC(inch-type) × 8 | No.4-40 UNC(inch-type) × 4 |
Dimensions | 482.6(W) × 44.1(H) × 50.8(D)mm | 482.6(W) × 44.1(H) × 54.5(D)mm | 482.6(W) × 44.1(H) × 51.5(D)mm |
Weight | 0.9kg |
Included items | Euroblock plug have tab × 32, Cable banc kit, Rackmount screw kit, Owner's Manual (this document) including warranty | Rackmount screw kit, Owner's Manual (this document) including warranty |
Other Details
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty is only valid within the country the unit was originally purchased.
WHAT IS COVERED AND WHAT IS NOT COVERED
Except as specified below, this warranty covers all defects in material and workmanship in this product. The following are not covered by the warranty:
1.Damage to or deterioration of the external cabinet.
2.Damage resulting from accident, misuse, abuse, or neglect
3.Damage resulting from failure to perform basic daily maintenance and/or calibration, or otherwise resulting from failure to follow instructions contained in your owner's manual.
4.Damage occuring during shipment of the product (claims must be presented by the carrier).
5.Damage resulting from repair or attempted repair by anyone other than TEAC or an authorized TASCAM service station.
6.Damage resulting from causes other than product defects, including lack of technical skill, competence, or experience of the user.
7.Damage to any unit which has been altered or on which the serial number has been defaced, modified, or removed.
WHO MAY ENFORCE THE WARRANTY
This warranty may be enforced only by the original purchaser.
LENGTH OF WARRANTY
All parts except heads and disk drives are warranted for one (1) year from the date of original purchase. Heads and disk drives are warranted for ninety (90) days from date of original purchase. Labor is warranted for ninety (90) days from date of original purchase.
WHAT WE WILL PAY FOR
We will pay all labor and material expenses for items covered by the warranty. Payment of shipping charges is discussed in the next section of this warranty.
HOW YOU CAN GET WARRANTY SERVICE
Your unit must be serviced by an authorized TASCAM service station in the United States. (This warranty is not enforceable outside the U.S.) If you are unable to locate an authorized TASCAM service station in your area, please contact us. We either will refer you to an authorized service station or instruct you to return the unit to the factory. Whenever warranty service is required, you must present both the original dated sales receipt and this warranty statement as proof of warranty coverage.
You must pay any shipping charges if it is necessary top ship the product for service. However, if the necessary repairs are covered by the warranty, we will pay return surface shipping charges to any destination within the United States.
LIMITATION OF IMPLIED WARRANTIES
Any implied warranties, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, are limited in duration to the length of this warranty.
EXCLUSION OF DAMAGES
TEAC's liability for any defective product is limited to repair or replacement of the product, at TEAC's option. TEAC shall not be liable for:
1.Damages bases upon inconvenience, loss of use of the product, loss of time, interrupted operation or commercial loss; or
2.Any other damages, whether incidental, consequential or otherwise.
Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitations of incidental or consequential damages, so the above limitations and exclusions may not apply to you.
To Locate an Authorized Service Center in Your Area
CALL 1-800-447-8322
TASCAM Professional Division
TEAC AMERICA, INC
1834 Gage Rd.
Montebello, California 90640
Voice: (323) 726-0303
Fax: (323) 727-7635
Web:www.tascam.com