Product Description
Strand Lighting 71500 S21 Dimmer Strip, 6 Dimmers, Pin Plug (GP) Output Connectors
This S21 6-Dimmer Strip with GP Grounded Stage Pin Connector from Strand Lighting features 3 dual dimmers, GP Grounded Stage Pin Connectors, DMX capability, and LCD menu operation. It is meant for theatrical lighting fixtures and special effects equipment. It may be pipe or wall mounted using optional accessory brackets.
Each S21 IGBT dual module contains two dimmers and is fully rated at 2.4kW per module. The 2.4kW rating of the module may be split evenly across both dimmers at 1.2kW, used on a single dimmer at 2.4kW, or any combination of loads on either dimmer that does not exceed 2.4kW per module.
S21 dimmers are designed to operate a wide variety of lighting loads of up to their rated capacity. The range of load types which may be connected includes incandescent lamps, and a number of "well-behaved" inductive loads such as low-voltage (step-down transformer) fixtures, fluorescent lamps, and most types of small motors used in special effects equipment such as wind or fog machines.
Please note the picture is for illustrative purposes only.
Specs
Number of Dimmers: | 3
|
Dual Dimmer Modules Output Voltage: | 100V / 110V / 115V / 120V (user selectable)
|
Minimum Load: | 1 watt Maximum Load/Dimmer: 2.4kW per Dimmer Module (max.)
|
Dimming Phase: | Forward or Reverse (user selectable or automatic)
|
Transition (Rise) Time: | Up to 1000 µS (automatic adjustable)
|
Insert Loss: | Max 2.5 volts
|
Power Feed: | 3-phase 4 wire 120/208 volts 20 amps; Terminal block or optional input power cables available |
Frequency:
| 50/60Hz
|
Ambient Temperature:
| 0 to 40 degrees C
|
Humidity: | 5%-95% Non-condensing
|
Cooling: | Natural Convection
|
Dimensions | Height: 6.0 in. (152.4 mm) Depth: 4.0 in. (101.6 mm) Length: 72.0 in. (1,828.8 mm) |
Weight | 38.5 lbs (17.5 kg)
|
Load Connector Types: | GP – Grounded Stage Pin GTL – Twistlock GR – Edison NEMA 5-20R |
Compliance: | Compliance: ETL Listed
|