Product Description
Strand Lighting 63060CM Vision.net Photocell Daylighting Sensor
The Vision.net Photocell Daylighting Sensor is a low-voltage daylighting sensor that measures changes in ambient light and controls its connected lighting loads according to the user's programming. The unit is able to decipher minor changes in light levels (such as passing cloud cover, intermittent shadowing, etc.) to prevent unwanted or inadvertent light cycling. In addition, the unit provides a programmable time-delay fade from 1 to 30 minutes for smooth light-cycling transitions. The Vision.net Photocell Daylighting Sensor is designed for use with a Vision.net Architectural Control System. When the device is connected, the sensor can dim the loads according to the space's needs for maximum energy conservation.
Features
• Detects and identifies pre-programmed ambient daylight levels to turn on lights when needed, and to prevent them from turning on when the ambient daylight is above a certain level
• Upon detection of a pre-programmed daylight set point, the sensor may be programmed to execute any Vision.net command across the architectural control network
• User-friendly programming unit is available to configure the sensor without the use of ladders
• “Laser Painting,” a sensor with the laser pointer built into the remote, provides accurate sensor selection for programming
• Sensor can be programmed with a laptop PC as well as with a remote
• Status LEDs facilitate sensor programming
• Each sensor can be programmed to execute any Vision.net system command