Product Description
Smoke Factory SF-0065 Tour Hazer II "S" Phenol - 1500 Watt Water-Based Haze Machine
Tour Hazer II ‘’S’’ PHENOL 120V - delivered in a touring case with phenolic resin coating.
Overview
The Tour Hazer II is a Hazer with experience on stages all over the world. Due to the water-based fluid, a clean production of fine Haze is possible. The special fluid of the Tour Hazer allows us to minimize the consumption of the device. So the Tour Hazer II needs only 1 ml/min for 40% performance. A 5ltr. canister Tour Hazer Fog is therefore sufficient for 83 hours, i.e. 3.5 days of continuous Haze. On a lower setting, running times of up to 5 days of continuous Haze can be achieved with a 5 liter canister. Two DMX channels allow an individual effect that can be adjusted from very fine, barely visible Haze to fog-like output. With the standard Phenol Case, the device is set up within a few seconds after removing the case lid. Only 60 seconds after plugging in the power cable the Tour Hazer II is heated up and ready for use. The Phenol Case is manufactured in Germany and has been protecting our Hazer for over 10 years in the tough touring world. Another advantage of the Case designs is a start-up, in almost every position. Only on the side with the leather inlet, the device should not be tilted during operation. This means that the Tour Hazer II can also be optimally placed on small stages. With the variable air baffle, the Haze can still be steered in the desired direction. The use of high-quality materials guarantees a long lifetime of the device.
Features
- Even more quiet, even more precisely adjustable
- DMX serial-production
- 1500 W / 110 V / 60 Hz
- Integrated timer
- Low liquid consumption
- Only 1 minute warm-up time
- Small dimensions
- 3 liter fluid container
- Made in Germany
Specifications
- Procedure: Haze machine based on vapor, 1500 watt
- Power Requirement: 110V, 50/60Hz
- Fluid Capacity: 3 Liter
- Fog Emission: 1-99% in 1% intervals
- Fog Time: Continuous on 100%
- Control Options: DMX, Stand-alone, Timer, Analog 0-10V,
- Warm-up Time: 60 seconds
- Temperature Control: Microprocessor Controlled
- Ambient Temperature: 41F to 113F
- Fluid Consumption: 8.9ml/min (max output
- Dimensions: 19.68" x 10.62" x 10.62"
- Weight: 31.08 lbs
Other Details
Effective only for the Federal Republic of Germany SMOKE FACTORY grants you warranty
for the machines in the portfolio of Smoke Factory according to the following conditions. For
warranty conditions outside of Germany, please see point 7:
1. Free of charge, subject to the following conditions (No. 2 - 6) we will repair any defect or
fault in the unit if it is caused by a proven factory fault and has been advised
immediately after appearance and within 36 months of delivery to the end user.
Insignificant deviations of the regular production quality does not guarantee
replacement rights, nor do faults or defects caused by water, by generally abnormal
environment conditions or an unavoidable accident.
2. Warranty Service will be done in the following way: Faulty parts will be repaired or
replaced according to our choice with the correct parts. Faulty units have to be
brought to us or our authorized service centers or to be sent to us or our service
centers at the customers expenses. The invoice and/or receipt showing the purchase
date and the serial number has to come with the faulty unit, otherwise we cannot
honor the warranty. Parts that are replaced become our property.
3. The customer loses all rights for warranty services, if any repairs or adjustments are
done to the units by unauthorized persons and/or if spare parts are used which are
nor approved by us. The right of warranty service is also lost if fluids other than the
original SMOKE FACTORY-fluid have been used or if units are sent to us with full
fluid bottles. Also non compliance with the instructions in this manual or mistakes by
incorrect handling/treating of the machine will lead to a loss of guarantee and also
any faults and damages caused by undue force.
4. Carrying costs caused to warranty services are borne by the customer himself.
5. Warranty services do not cause an extension of the warranty time or the start of a
new warranty time. The warranty for replaced parts ends with the warranty time of
the whole device.
6. If a defect/fault can not be repaired by us in a satisfactory time frame, we will do one
of the following within 36 months after sale (customer may choose):
a. replace the whole unit for free or
b. refund the lesser value or
c. take back the whole unit and refund the purchase price, but not more
than the usual market price at the time of the refund.
7. Further claims, especially for damages, losses etc. outside the unit are excluded, if the
liability is not statutory. Outside the Federal Republic of Germany the warranty
conditions of our local agencies take effect. Our local agencies in and outside the
Federal Republic of Germany will provide you with the warranty conditions any time.
In case you do send the Carpet Crawler in for warranty repairs, please make sure
that the fluid is removed from the bottle.
Product Videos