Product Description
Shure PGXD24/BETA58-X8 PGX-D Series Single-Channel Digital Wireless Microphone System
The PGXD24/BETA58A Handheld Wireless System is part of the PGX-D wireless systems family.
PGX-D Digital Wireless, with state-of-the-art, 24-bit digital audio and trusted Shure microphones, delivers stunning sound and a strong, clean RF signal.
Includes PGXD4 receiver, PGXD2/BETA58A handheld transmitter, clip, power supply, 2 AA batteries, carrying case, and user guide.
PGX Digital adds the clarity of 24-bit digital audio to the famed PGX line of Shure wireless products. Offering tailored wireless solutions for vocalists, guitarists, and presenters, PGX Digital combines the trusted legacy of Shure microphones with state of the art, 24-bit digital wireless technology that delivers strong, clean RF performance. The result is wireless audio that sounds like wired, rock-solid RF signal, and simple setup and operation.
The PGX Digital Beta 58A Vocal Wireless System from Shure adds the clarity of 24- bit digital audio to the legacy of trusted Shure microphone options for wireless performance. This system includes the Beta 58A, a precision-engineered supercardioid dynamic microphone optimized for lead vocal applications. Included: PGXD4 wireless receiver, Beta 58A microphone with PGXD2 handheld transmitter, padded carrying case, microphone clip.
Features
- PGXD4 Wireless Receiver:
- 24-bit / 48 kHz digital technology for incredibly accurate sound
- Automatic frequency selection locates a clear channel instantly
- One-touch sync automatically syncs the transmitter and receiver
- True digital diversity delivers rock-solid wireless signal reliability
- Up to 5 systems can be used at once
- 1/4” and XLR audio outputs
- Included padded carrying case for portability and protection
- PGXD2 Handheld Transmitter with Beta58A:
- Precision-engineered supercardioid dynamic microphone optimized for lead vocal applications
- Power, mute, and battery status LED
- Up to 10 hours of continuous use from 2 AA batteries
- 200 ft (60 m) operating range
- Rugged construction for reliable performance show after show
Specs
- Operating Range: 200 ft. (60 m) under typical conditions. (Actual range depends on RF signal absorption, reflection and interference.)
- RF Carrier Range: X8: 902–928 MHz, X8A: 915–928 MHz, X8B: 902–907.5 MHz, 915–928 MHz (Note: varies by region)
- Audio Frequency Response (± 2dB): 20 Hz - 20 kHz
- System Gain: PGXD2: 0 dB at minimum gain setting, 6.35 mm (1/4“) connector / -12.5 dB at minimum gain setting, XLR output
- PGXD1: -54.5 dBV/Pa at -10 dB gain setting, with SM58 cartridge, XLR output
- Total Harmonic Distortion: < 0.02%, A-weighted, typical (Ref. 1 kHz, 6 dB below input clip)
- Dynamic Range: > 108 dB A-weighted
- Operating Temperature Range: -18°C (0°F) to +50°C (+122°F). Note: battery characteristics may limit this range.
- Audio Input Level: +5dBV maximum at -10dB gain position / -5dBV maximum at 0dB gain position
Handheld Transmitter
- Gain Adjustment Range: 10dB
- RF Output Level: 10mW maximum (dependent on applicable country regulations)
- Housing: Molded PC/ABS handle and battery cup
- Dimensions (including SM58 cartridge): 10" x 2" x 2"
- Weight: 10.2 oz without batteries
- Power: 2 "AA" size batteries
- Battery Life: Up to 9 hours
Wireless Receiver
- Dimensions: (HxWxD) 40 mm x 181 mm x 104 mm (1.6" x 7.125" x 4.1")
- Weight: 289 g (10.2 oz.)
- Housing: ABS
- Audio Output Level: (ref. ± 38 kHz deviation, 1 kHz tone): XLR connector (into 3,000 Ohm load): -2.5 dBV / 1/4" connector (into 10,000 Ohm load):+10 dBV
- Impedance:
- XLR: 50 Ohms
- 1/4": 50 Ohms
- Sensitivity: -102 dBm @ 10-5 BER
- Image Rejection: > 70 dB, typical
- XLR output (Impedance balanced):
- Pin 1: Ground (cable shield)
- Pin 2: Audio
- Pin 3: No Audio
- Audio LED:
- Red: 2 dB below clip
- Amber: 12 dB below clip
- Green: 50 dB below clip
- Power Requirements: 12 - 18Vdc at 150 mA, supplied by external power supply
- Pin Assignments:
- XLR: 1 = ground, 2 = hot, 3 = cold
- 1/4” TRS: Tip = audio, Ring = no audio, Sleeve =ground
