Product Description

Shure P3TR112GR PSM 300 Wireless In-Ear Monitor System

PSM 300 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts. 

Easy to setup and operate, PSM 300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume and use MixMode technology or stereo mode to create a personal mix from two channels of audio.

Included

• P3R Wireless Bodypack Receiver
• P3T Half-Rack Single Channel Wireless Transmitter
• SE112 Single-Driver Sound Isolating Earphones
• Rackmount and hardware kits
• ¼-Wave Antenna
• BNC Bulkhead Adapter
• BNC Cable
• Power Supply
• Two (2) AA Batteries
• Zipper Bag
• User Guide

Features

• Includes P3R bodypack receiver, P3T single-channel transmitter, and SE112 isolating earphones
• Rackmount and hardware kits included
• One-touch frequency scan and sync
• Audio Reference Companding delivers the clearest sound and no artifacts
• Easy to set up and operate for entry-level users

Specs

• Overall System:
• RF Carrier Range: 488 – 937.5 MHz (Note: varies by region)
• Compatible Frequencies Per Band: Up to 15
• Tuning Bandwidth: 24 MHz maximum (Note: varies by region)
• Operating Range: 300 ft (90 m)
• Audio Frequency Response: 38 Hz – 15 kHz
• Signal-to-Noise Ratio: 90 dB (typical)
• Total Harmonic Distortion: < 0.5% (typical) (ref. ±34 kHz deviation @ 1 kHz)
• Companding: Patented Shure Audio Reference Companding
• Spurious Rejection: > 80 dB (typical)
• Frequency Stability: +/- 2.5 ppm
• MPX Pilot Tone: 19 kHz (+/- 1 Hz)
• Modulation: FM, MPX Stereo (ref. +/- 34 kHz deviation @ 1 kHz)
• Operating Temperature: 0° F to 145° F (-18° C to +63° C)
• SE112 Earphones:
• Speaker Type: Single Dynamic MicroDriver
• Sensitivity: 108 dB SPL/mW
• Frequency Range: 25 Hz – 17 kHz
• Cable Style: 50" Fixed
• Colors: Gray
• P3R Receiver:
• Active RF Sensitivity (at 20 dB SINAD): 2.2 µV
• Image Rejection: > 90 dB
• Adjacent Channel Rejection: > 60 dB
• Intermodulation Attenuation: > 50 dB
• Blocking: > 60 dB
• Audio Output Power (1 kHz @ < 1% distortion, peak power, @ 32 Ohms): 80 mW (per output)
• Minimum Load Impedance: 16 Ohms
• Headphone Output: 1/8" (3.5 mm) stereo
• Net Weight (without batteries): 3.5 oz. (98 g)
• Dimensions (HxWxD): 4.3" x 2.5" x 0.8" (110 x 64 x 21 mm)
• Battery Life: 5 – 7 hours (continuous use) AA batteries
• P3T Transmitter:
• RF Output Power: 10, 20, 30 mW (Note: varies by region)
• RF Output Impedance: 50 Ohms (typical)
• Net Weight: 27.6 oz. (783 g)
• Dimensions (HxWxD): 1.7" x 7.8" x 6.8" (43 x 198 x 172 mm)
• Power Requirements: 12 – 15 V DC, 260 mA maximum