Product Description
Shure MX415WRLPDF/N 15-inch Dualflex Gooseneck Microphone, Light Ring - Bright White
Designed for applications where aesthetics are essential, the MX415WRLPDF/N 15" Duraflex gooseneck microphone from Shure has a sleek, compact profile that's suitable for boardrooms, conferences, or municipal applications. Duraflex points at the top and bottom of the gooseneck provide maximum placement versatility. The MX415WRLPDF/N comes equipped with a red light indicator ring at the top that displays status at a glance, while the snap-fit windscreen and rubber isolation rings reduce noise so the speaker can be clearly heard.
The MX415WRLPDF/N Does Not include a desktop stand/preamp. Desktop base, wireless desktop base, and surface mount preamp options are available separately.
A capsule Is Not Included with the MX415WRLPDF/N. Cardioid and supercardioid options are available separately.
Applications
- Boardrooms
- Lecture halls
- Municipal conferencing
- Courtrooms
Included
- Snap-fit windscreen
Features
- Gooseneck length: 15 inch / 38.1 cm)
- Duraflex gooseneck
- Low profile, aesthetic design
- Wide dynamic range and smooth frequency response
- RF filtering with CommShield technology
- Status indicator: Red light ring on gooseneck top
- Capsule options: None, Cardioid, Supercardioid
Specs
- Type
- Condenser (electret bias)
- Frequency Response
- 50–17000 Hz
- Polar Pattern (at 1 kHz)
- MX415/C: Cardioid
- MX415/S: Supercardioid
- Output Impedance
- EIA Rated at 150 Ω (170 Ω actual)
- Output Configuration
- Active Balanced
- Sensitivity (at 1 kHz , open circuit voltage)
- Cardioid: –35 dBV/Pa (18 mV)
- Supercardioid: –34 dBV/Pa (21 mV)
- 1 Pascal=94 dB SPL
- Maximum SPL (1 kHz at 1% THD, 1 kW load)
- Cardioid: 121 dB
- Supercardioid: 120 dB
- Equivalent Output Noise (A-weighted)
- Cardioid: 28 dB SPL
- Supercardioid: 27 dB SPL
- Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)
- Cardioid: 66 dB
- Supercardioid: 68 dB
- Dynamic Range (1 kΩ load at 1 kHz)
- 93 dB
- Common Mode Rejection (10 Hz to 100 kHz)
- 45 dB minimum
- Preamplifier Output Clipping Level (1% THD)
- -8 dBV (0.4 V)
- Polarity
- 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector.
- 5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector.
- Logic Connections
- LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V.
- LOGIC OUT: Active low (≤1.0V), sinks up to 20mA, TTL compatible. Absolute maximum voltage: -0.7V to 50V (up to 50V through 3kΩ).
- Mute Switch Attenuation
- -50 dB minimum
- Environmental Conditions
- Operating Temperature: -18–57 °C (0–135 °F)
- Storage Temperature: -29–74 °C (-20–165 °F)
- Relative Humidity: 0–95%
- Power Requirements
- 48–52 Vdc phantom, 8.0 mA