Designed for applications where aesthetics are essential, the MX415WLP/N 15" miniature gooseneck microphone from Shure has a sleek, compact profile that's suitable for boardrooms, conferences, or municipal applications. The MX415WLP/N comes equipped with a bi-color LED indicator at the bottom that displays status at a glance, while the snap-fit windscreen and rubber isolation rings reduce noise so the speaker can be clearly heard.

The MX415WLP/N Does Not include a desktop stand/preamp. Desktop base, wireless desktop base, and surface mount preamp options are available separately.

A capsule Is Not Included with the MX415WLP/N. Cardioid and supercardioid options are available separately.

Applications

• Boardrooms
• Lecture halls
• Municipal conferencing
• Courtrooms

Included

• Snap-fit windscreen

Features

• Gooseneck length: 15 inch / 38.1 cm)
• Low profile, aesthetic design
• Wide dynamic range and smooth frequency response
• RF filtering with CommShield technology
• Status indicator: Bi-Color LED at gooseneck bottom
• Capsule options: None, Cardioid, Supercardioid

Specs

• Type
• Condenser (electret bias)
• Frequency Response
• 50–17000 Hz
• Polar Pattern (at 1 kHz)
• MX415/C: Cardioid
• MX415/S: Supercardioid
• Output Impedance
• EIA Rated at 150 Ω (170 Ω actual)
• Output Configuration
• Active Balanced
• Sensitivity (at 1 kHz , open circuit voltage)
• Cardioid: –35 dBV/Pa (18 mV)
• Supercardioid: –34 dBV/Pa (21 mV)
• 1 Pascal=94 dB SPL
• Maximum SPL (1 kHz at 1% THD, 1 kW load)
• Cardioid: 121 dB
• Supercardioid: 120 dB
• Equivalent Output Noise (A-weighted)
• Cardioid: 28 dB SPL
• Supercardioid: 27 dB SPL
• Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)
• Cardioid: 66 dB
• Supercardioid: 68 dB
• Dynamic Range (1 kΩ load at 1 kHz)
• 93 dB
• Common Mode Rejection (10 Hz to 100 kHz)
• 45 dB minimum
• Preamplifier Output Clipping Level (1% THD)
• -8 dBV (0.4 V)
• Polarity
• 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector.
• 5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector.
• Logic Connections
• LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V.
• LOGIC OUT: Active low (≤1.0V), sinks up to 20mA, TTL compatible. Absolute maximum voltage: -0.7V to 50V (up to 50V through 3kΩ).
• Mute Switch Attenuation
• -50 dB minimum
• Environmental Conditions
• Operating Temperature: -18–57 °C (0–135 °F)
• Storage Temperature: -29–74 °C (-20–165 °F)
• Relative Humidity: 0–95%
• Power Requirements
• 48–52 Vdc phantom, 8.0 mA