Product Description
Shure MX202BP/N Microflex Overhead Microphone - Black
The Shure MX202BP/N Microflex Overhead condenser microphone captures Shure-quality sound in an adjustable compact package. The MX202BP/N features a flexible 4" gooseneck, a plate-mounted preamplifier, and a 30 foot cable.
When combined with the high-sensitivity cartridge's wide frequency response, this microphone provides accurate sound reproduction with a minimum of RF interference or electromagnetic hum. The MX202BP/N works with interchangeable cardioid, supercardioid and omnidirectional condenser cartridges (none of which are included), which fit every model in the Microflex product line for enhanced convenience and consistent sound.
Features
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Interchangeable cartridges that providean optimal polar pattern choice for each application (none are included)
- Balanced, transformerless output for increased immunity to noise over long cable runs
Specs
- Frequency Response: 50 Hz to 17 kHz
- Output Impedance: EIA Rated at 150 ohms (180 ohms actual)
- Maximum SPL (1 kHz at 1% THD, 1 kohm load): 124.2 dB
- Sensitivity (At 1,000 Hz, open circuit voltage): –35.0 dBV/Pa (17.8 mV)
- Equivalent Output Noise (A-weighted): 28.0 dB SPL
- Signal to Noise Ratio (referenced at 94 dB SPL): 66.0dB
- Dynamic Range at 1 kohm Load: 96.2 dB
- Common Mode Rejection: 45.0 dB minimum
- Preamplifier Output Clipping Level (1% THD): –6.0 dBV(0.5 V)
- Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
- Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
- Environmental Requirements
- Operating Temperature Range: –18° C to 57° C (0° F to 135° F)
- Relative Humidity: 0 to 95%
Note:
The microphone cartridge shown on the MX202BP/N in the picture above is NOT INCLUDED with purchase.