Product Description
Shure MV7 Podcast Microphone
Inspired by the legendary SM7B, the MV7 is a dynamic microphone with both USB and XLR outputs for use with computers and professional interfaces alike. Connect via USB and explore additional set-up features and Auto Level Mode within our ShurePlus™ MOTIV app, to control your vocal tone, and distance from the microphone. With Auto Level Mode, you can let the microphone do the work for you.
How it Works
We get it, not everybody is lucky enough to record in sound-treated studio, so the MV7 is equipped with Voice Isolation Technology so it’s laser-focused on your voice to give you a professional recording, without any background or room noise. Once recording, use the built-in 3.5mm headphone jack to monitor your sound and adjust mic gain, headphone volume, monitor mix and more using the built-in touch panel.
Don’t let the USB connection fool you; the MV7 is a professional dynamic microphone that is compatible with all professional interfaces via XLR if you’re recording in the studio.
Why it's Better
Let Your Microphone Do The Work For You
If connected via USB, download our free ShurePlus™ MOTIV app for desktop, which gives you access to additional features on your MV7. Activate Auto Level Mode, select your preferred voice tone and distance from the microphone, and let the microphone adjust your level in real time for a consistent output, no matter if you’re recording or live streaming. Choose Manual Mode to have full control over your sound and adjust Mic Gain, Monitor Mix, EQ, Limiter, Compressor and more. With your level being constantly adjusted by the microphone to keep your sound consistent, you can spend more time creating, and less time editing. Let your microphone do the work for you.
System Requirements
System Requirements and Compatibility: Mac
- MacOS 10.13 to 10.15
- 64 bit
- Minimum 2 GB of RAM
- Minimum 500 MB of hard disk space
System Requirements and Compatibility: Windows
- Windows 10
- 64 bit
- Minimum 2 GB of RAM
- Minimum 500 MB of hard disk space
System Requirements and Compatibility: iOS
- iOS: iOS 12 and higher
- iPhone: iPhone 6 and higher
- iPod Touch: 6th gen
Note: iPad Pro (USB-C) is not supported.
System Requirements and Compatibility: Android
Will work with any Android device that has:
- Android Oreo 8.0 and higher
- USB Host Power Requirement of ≥100 mA
- USB Audio Class 1.1 support and higher
Specs
MFi Certified
Yes
DSP Modes (Presets)
Near/Far, Dark/Natural/Bright
Transducer Type
Dynamic (moving coil)
Polar Pattern
Unidirectional (Cardioid)
Output Impedance
314 Ω
Frequency Response
20 Hz to 20,000 Hz
Adjustable Gain Range
0 to +36 dB
Sensitivity
(@ 1 kHz, open circuit voltage)
-55 dBV/Pa [1] (1.78 mV), -47 dBFS/Pa [1] [2]
Maximum SPL, Digital Output
132 dB SPL [2]
Headphone Output
3.5 mm (1/8″)
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Mute Switch Attenuation
Yes
Limiter
Yes
Compressor
Yes
Power Requirements
Powered through USB or Lightning connector
Housing
All metal construction
Mounting Type
5/8-27 thread mount
Net Weight
0.55 kg (1.21 lbs)
