Product Description
Shure AXT630US Axient Series Antenna Distribution System 470-698 MHz
Key Features
- For Use with Axient Receivers
- For Clean Signal in Bad RF Environments
- Protects Against Out-of-Band Signals
- Handles High Levels without Distortion
- 4 Pairs of BNC Antenna Outputs
- Unfiltered RF Cascade Ports
- Selectable 60 MHz Filters
- Networkable over Ethernet
- Daisy-Chain AC Power over IEC I/O
- Multiple Included Cables & Accessories
Overview
Designed for professional applications in which you need reliable wireless sound, the Shure AXT630 is an Antenna Distribution System capable of handling high signals without distortion, even in the most inconvenient RF environments. This unit sports selectable 60 MHz input filters to match with the available bands from Axient transmitters, thus offering protection against out-of-band signals and ensuring a low overall RF noise floor.
The unit sports four pairs of BNC antenna outputs to distribute its filtered signal to receivers. You'll also note the unfiltered RF cascade ports to connect to wideband devices, such as the Axient Spectrum Manager. The AXT630 can also network to other units by means of its Ethernet connections, so that you can control filtering ranges, antenna power, and attenuation over Shure's WWB6 software. Controls are also easily managed via the front-panel interface.
This powerful unit is constructed to fit into an audio rack, taking up only 1 RU of space. Included with the AXT630 are a 2' coaxial antenna cable, an IEC power cable, and IEC extension cable, as well as Ethernet cables, a hardware kit, and shorter coaxial cables.
Specifications
| Connectors | BNC, Unbalanced, Active |
| Bands | Wideband: 470 to 698 MHz G1: 470 to 530 MHz H4: 518 to 578 MHz J5: 578 to 638 MHz L3: 638 to 698 MHz |
| Impedance | 50 Ohms |
| Bias Voltage | 12 VDC, 150 mA (300 mA Maximum) |
| Connector Type | 8 x BNC (4 Pairs) |
| Configuration | Unbalanced, Active |
| Impedance | 50 Ohms |
| Gain Adjustment Range | Cascade Enabled: -15 to 0 dB (in 1 dB Steps) Cascade Disabled: -12 to +3 dB (in 1 dB Steps) |
| Output Intercept Point | >25 dBm, Typical |
| Connector Type | 2 x BNC |
| Configuration | Unbalanced, Wideband |
| Impedance | 50 Ohms |
| Insertion Loss | <5 dB |
| Power Requirements | 100 to 240 VAC, 50 to 60 Hz |
| Current Drain | 1.0 A RMS (Referenced at 120 VAC) |
| Operating Temperature Range | 0 to 145°F / -18 to 63°C |
| Storage Temperature Range | -20 to 165°F / -29 to 74°C |
| Dimensions | 1.7 x 19.0 x 14.4" / 44 x 483 x 366 mm |
| Weight | 10.1 lb / 4.6 kg |
