Product Description
Shure 565SD-LC Cardioid Dynamic Handheld Mic with Wire Mesh Grille and On/Off Switch
The Shure 565SD Classic Unisphere Vocal Microphone is a dual-impedance, unidirectional dynamic microphone famous for its spot on the Woodstock stage. It features highly effective wind and "pop" filter for vocals and a durable, wire-mesh front grille. Shipped connected for low-impedance operation, the 565SD provides excellent vocal or speech reproduction onstage, and can also be used with public address systems.
Features
- Versatile, high-quality microphone with sound characteristics similar to the Shure SM58
- Selectable dual-impedance operation
- Silent magnetic reed on/off switch with lock-on option
- Highly effective wind/pop filter
- Can also be used with public address systems
Included
- 1 - A25D Microphone Clip
Specs
- Microphone Type: Dynamic
- Polar Pattern: Cardioid
- Frequency Response: 50Hz-15kHz
- Output Impedance: 150 ohms (250 ohms actual) for low impedance, optional high impedance setting
- Sensitivity: Low -58dB (1.3mV), High -35dB (17.6mV)
- Color: Gray
- Connector: XLR
- Weight: 0.565 lbs.
General Description
The 565SD microphone is a dual-impedance, unidirectional dynamic microphone with a strong, wire-mesh, spherical front grille that contains a highly effective wind and "pop" filter.
Shipped connected for low-impedance operation, a 565SD microphone provides excellent vocal or speech reproduction on stages and studios, and is a popular choice for use in public auditoriums, churches, convention halls, and schools.
Features
- Selectable dual-impedance operation
- Silent, lockable on/off switch
- Cardioid dynamic
- Frequency response: 50 to 15,000 Hz
Impedance Selection
The microphone is shipped connected for low impedance operation. To change to high impedance proceed as follows:
- Loosen plug element by turning slotted setscrew counterclockwise (turn counterclockwise to lower screw into plug element). Pull plug element from case. Be careful not to stretch or break wires.
- The low impedance socket of the impedance selection connector is connected to Pin 3 of the plug element. Move the connector to the high-impedance socket (see diagram).
- Reinsert plug element and tight setscrew (turn clockwise to raise screw).
Polarity
To test two microphones and their cables for common polarity, connect them to an amplifier and talk or sing into them while holding them three or four inches apart. The sound from the speakers should be the same when talking into either microphone or directly between them if they have common polarity. If the sound level drops drastically, or if a dead spot is found when talking between the two microphones, either the microphones or their cables have different polarity. All cables and microphones can be tested in this manner to ensure that they have common polarity.
To reverse the polarity of a low-impedance microphone cable, use either a Shure A15PRS Switchable Phase Reverser or interchange the wires connected to pins 2 and 3 of the XLR connector.
Specifications
Type
Dynamic (moving coil)
Frequency Response
50 to 15,000 Hz
Polar Pattern
Cardioid
Output Impedance
EIA rated at 150 Ω (250 Ω actual)
Sensitivity(at 1 kHz, open circuit voltage)
L: | -56.0 dBV/Pa (1.6 mV) |
H: | -34.0 dBV/Pa (20 mV) |
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Weight
Net: 0.298 kg (0.656 lbs)
Switch
Lockable ON/OFF switch
Connector
Three-Pin Professional Audio Connector
Case
Chrome-plated die casting with steel mesh grille
[1] 1 Pa = 94 dB SPL
Accesories
Furnished Accessories
Microphone Clip for SM58, SM57, SM87A, BETA87A, BETA87C, PGA57, PGA58, PGA48, PGA81 Microphone Clip for SM58, SM57, SM87A, Beta 87A, Beta 87C, PGA57, PGA58, PGA48, PGA81 |
Optional Accessories
Line Matching Transformers | A95 |
Shock Stopper® Isolation Mount | |
Shock Stopper Isolation Mount | |
Over/Under Dual Mount for two microphones: SM57, BETA57A or 545 Series microphonesOver/Under Dual Mount for two microphones: SM57, Beta 57A or 545 Series microphones | |
Foam Windscreen for all larger Shure "ball-type" Microphones available in black, blue, gray, green, red and yellow | |
7.6 m (25 ft.) Cable (XLR-XLR) | |
20' Cable with ¼" Phone Plug on Equipment End (Pin 2 Hot) |