Product Description
sE Electronics DM2 Dynamite Active In-line Mic Preamp with Selectable Gain and Impedance
Overview
The DM2 TNT lets you choose between a moderate +15dB or explosive +30dB of gain with an ultra-high impedance input and eight load settings to perfectly match any passive microphone.
Recommended Use
Dynamic & passive ribbon microphones
Features
- Switchable, clean and consistent gain from moderate +15dB to explosive +30dB
- Eight load settings ranging from 50 ohms to stunningly high 10 mega ohms to precisely match any mic
- Sophisticated class-A design and specially-selected high-grade FETs for a signal boost without coloration
- Vastly lower output impedance and nearly half the noise of anything else on the market to raise any mic level with clarity
- All-metal housing and premium finish ensures the DM2 can handle demanding on-tour or recording/broadcast studio lifestyles
- Gold plated XLR connector for loss-free reliable signal connection
Specifications
Power
- Electrical Impedance: 135 Ohms
- Recommended Load Impedance: >1K Ohms
- Connectivity: 3-pin male/female XLR connector
- Powering: 48V Phantom Power (P48 according to IEC 61938)
Sound
- Frequency range: 10 Hz - 120 kHz (-0.3 dB)
- Gain: 15 dB / 30 dB
- Current consumption: 3.1 mA
- Max output level: (0.5% THD)9.5 dBV (3.0 V)
- Output noise level: 1 μV @ 15 dB / 6.6 μV @ 30 dB
Dimensions
- Preamp diameter: 19 mm (0.75 in.)
- Preamp length: 96 mm (3.78 in.)
- Preamp weight: 80 g (2.82 oz.)
What's in the box
- DM2
- sE Logo Sticker
- User manual with warranty card