Product Description
sE Electronics DM1 Dynamite Active In-line Mic Preamp with 28dB Gain
Overview
An ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones.
Recommended Use
Dynamic & passive ribbon microphones
Features
- Sophisticated class-A design and specially-selected high-grade FETs for a signal boost without coloration
- Vastly lower output impedance and nearly half the noise of anything else on the market to raise any mic level with clarity
- Always a consistent +28dB regardless of the connected load to enable mics with a lower output
- Provides improved level to a preamp – all without adding noise or coloration, bringing new life to your favorite passive microphones
- All-metal housing and premium finish ensures the DM1 can handle demanding on-tour or recording/broadcast studio lifestyles
- Gold plated XLR connector for loss-free reliable signal connection
- Perfect for podcasting, recording, or live sound
Specifications
Power
- Electrical Impedance: 135 Ohms
- Recommended Load Impedance: >1K Ohms
- Connectivity: 3-pin male/female XLR connector
- Powering: 48V Phantom Power (P48 according to IEC 61938)
Sound
- Frequency range: 10 Hz - 120 kHz (-0.3 dB)
- Gain: 28 dB
- Current consumption: 3.0 mA
- Max output level: (0.5% THD)8.3 dBV (2.6 V)
- Output noise level: 9 µV (a-weighted)
- Input impedance: 10k Ohms
Dimensions
- Preamp diameter: 19 mm (0.75 in.)
- Preamp length: 96 mm (3.78 in.)
- Preamp weight: 96 mm (3.78 in.)
What's in the box
- DM1
- sE Logo Sticker
- User manual with warranty card