Product Description
Roxx 13204001 CLUSTER B4 W
All CLUSTER products can be easily connected both horizontal and vertically, by using the integrated C-Lok system. The series is made to enable toolless multiple array configurations, scalable from a single vertical line, to massive matrix like arrays. ROXX Audience Blinder are available as 2-lite or 4-lite individually adjustable pods, in either a warmwhite or fullcolor version.
CLUSTER B4 W Warm white
In the warmwhite versions, an emulated ´shift to warm´ warms the color temperature of the light as it dims. To deliver a perfect classic tungsten look, Amber and Red LED´s are mixed with the highpower warmwhite LED´s when decaying. ROXX CLUSTER B4 W LED Blinder truly exceed the output of a conventional DWE blinder, while consuming 60% less power and being almost twice as bright and replaces the need of installing tungsten lamps at the rate of 500+ times.
- 4 x 300 Watts
- WarmWhite + Amber + Red LED´s
- Up to 40.000lm luminous flux
- C-Lok Cluster System
- Magnetic Pre-Link system
- 4-lite Audience Blinder, Strobe, Wash
- IP65 rated for Indoor & Outdoor use
- Being almost twice as bright while consuming 60% less power compared to a conventional DWE blinder
- Emulated “shift to warm” to mimic incandescent fixtures
- Individually controllable Pods for stunning pixel effects
- Integrated C-Lok system for toolfree and seemless CLUSTER setups
- Pre-Link Magnets for easy alligning and “one-handed” operation
- Multiple mounting locations for creative rigging options & floor mount
- 16-bit dimming control for smooth, perfect fades
- Four selectable dimmer curves with adjustable response
- Adjustable PWM frequencies up to 25kHz guarantee flicker-free camera operation
- Individual pan of each pod to allow for directional adjustments
MOUNTING
There are several mounting options – Camlock mounts on top and back enable the use of Omega-Brackets, Yokes can be attached to M12 mounting points on all sides, or the internal C-Lok system can be used for seemless interconnection. Pre-Link Magnets on top and side help to allign the fixtures and allows “one-handed” operation for secure locking.
SPECIFICATIONS
Photometrics
| LED expected lifetime | 50.000 hours |
| Lightsource | 4x 300W Warm-White + Amber + Red |
| Type of optical system | Reflector with Compound Eye Lens |
| LED PWM Frequency | selectable 800Hz, 1.200Hz, 2.000Hz, 3.600Hz, 12kHz, 25kHz |
| Beam angles (50%) | 50° |
| Maximum Field angles (10%) | 87° |
| Color temperature range | 2.900K |
| CRI/Ra | 80 |
| Efficancy (max) | 25,19 lm/W |
| Luminous flux | 34.000 lm |
| illuminance Lux @ 1m / 3,3ft | 37870lx / 3518fcd |
| illuminance Lux @ 3m / 9,8ft | 4295lx / 399fcd |
| illuminance Lux @ 5m / 16,4ft | 1535lx / 143fcd |
| illuminance Lux @ 7m / 23,0ft | 795lx / 74fcd |
| illuminance Lux @ 10m / 32,8ft | 395lx / 37fcd |
Dimensions & Weight
| IP class | IP65 |
| IK class | IK08 |
| Body material | Aluminum, Nylon |
| Lens material | Tempered glass front |
| Net dimensions (w x h x d) | 400 x 400 x 191mm |
| Net dimensions inches | 15,75 x 15,75 x 7,52 inches |
| Net weight (incl. Yoke) | 16,2 kg (35,71lbs) |
| Tilt | 360° |
| Tilt Locking System | Locking system with toothing and angle indicator |
Electrical Data
| AC Power, max | 90 – 285V 50/60Hz |
| AC Power, nominal | 100 – 240V 50/60Hz |
| Electrical protection | Overload protection with automatic recover |
| Max power consumption | 1350W |
| Constant power consumption | 440W |
| Power Max. Out | 9A @ 230V / 2A @ 120V |
| Power Linking @ Max Power Consumption (Boost Mode) | 1 unit @ 230V / 0 unit @ 120V |
| Power Linking @ Constant Power Consumption (Illumination Mode) | 7 units @ 230V / 2 units @ 120V |
| Power Factor | 0.944 PF (230V) / 0.998 PF (120V) |
| Power Supply Unit | Inbuilt auto-ranging electronic switch-mode |
Operator & Controller
| DMX Functions | Master Dimmer, Master Dimmer Fine, Shutter, Duration, Dimmer 1-4, Dimmer 1-4 Fine, Dimmer Curve, Dimmer Response, Redshift, Effect, Device Settings |
| DMX channels | 1CH DWE, 4-1CH DWE, 4-2CH DWE, 7CH STROBE, 9CH STANDARD (default), 12CH EXTENDED, 17CH EXTENDED |
| DMX modes | 7 |
| Protocol | USITT DMX512A |
| RDM ANSI E1.20 | |
| Setting and addressing | OLED graphical display / 4 controls |
| RDM ANSI E1.20 | |
| Standalone mode | Auto Program, Quick Light |
| Wireless DMX | n.a. |
| Indicator | OLED graphical display |
| Controls | 4 touch sensitive, backlighted controls |
| Strobe | 0-20Hz |
| DMX I/O | IP65 XLR 5-pin male/female |
| Power In | TRUE1 compatible input & link-thru sockets |
| USB Firmware Update | IP65 USB socket |
Installation
| Mounting point by Yoke (included) | 3x 13mm / 1/2″ holes, 1x centric TV Spigot attachement, 3x integrated Camlocks for Omega Brackets |
| Mounting point on fixture | 1/4 turn Omega Bracket on top and rear side |
| Mounting point with otional Rigging Bracket | 2x 13mm / 1/2″ holes for Clamp fixation |
| Orientation | Any |
| Rigging possibilities | Hanging or ceiling / pendant mount |
| Safety features | 2x rear mount for safety wire |
| Minimum distance from flammable materials | 0,3 meters (11,8 inch) |
Thermal Characteristics
| Cooling | Active, Forced Air, Temperature-regulated |
| Humidity (max.) | 95% |
| Temperature range, Operating | -40°C to 45°C |
| Temperature range, Start-up | -20° to 45°C |
| Temperature range, Storage | -40°C to 80°C |
| Thermal Protection | Automatic overtemperature protection |
Compliance
| CE – 2014/30/EU: EMC Directive |
| EN 55103-2 |
| EN 55015 |
| EN 61547 |
| EN 61000-3-2 |
| EN 61000-3-3 |
| EN 55032 |
| CE – 2014/35/EU: Low Voltage Directive |
| EN 60598-1 |
| EN 60598-2-17 |
| EN 62471 |
| EN 60529 |
| RoHS2 Directive |
| 2011/65/EU |
| ETL C/US |
| FCC |
| UKCA |
