Product Description
RDL ST-VP1 Voice-Over / Paging Module - Manual
Overview
The ST-VP1 is intended for voice-over paging with user adjusted and controlled FADE or CUT between two input sources. This unit is also perfect for voice-overs where precise and consistent fade levels are required. Automatic operation can be achieved when used in conjuction with RDL´s® ST-ACR products.
Power Supply Not Included
Recommended Power Supply:
- PS-24AS (USA)
- PS-24AX (International)
Features
- High-Quality Voice-Over Mixing
- Noiseless Paging
- Single Input Adapted for Paging or Voice-Over
- Selectable Fade-Under or Hard-Cut
- Adjustable Fade DEPTH and RATE
- Soft Audio Switching
Specifications
MUSIC SOURCE:
Frequency Response: 10 Hz to 20 kHz (± 0.25 dB)
THD+N: < 0.01%
Attenuation when muted: > 65 dB
VOICE SOURCE:
Frequency Response: 30 Hz to 20 kHz (± 0.25 dB)
THD+N: < 0.01%
Attenuation when muted: > 80 dB
COMMON:
Input Level: +4 dBu Balanced (may be connected unbalanced)
Output Level: +4 dBu balanced (may be connected unbalanced)
Gain (either input): Unity (balanced input/output)
Noise: < -85 dB (below +4 dBu output)
Headroom: > 18 dB (above +4 dBu)
Fade Rate: Adj. 0.3 to 1.3 seconds (for 20 dB fade) Adj. 0.2 to 1.0 seconds (for 12 dB fade)
Fade Depth (music input): Adj. 3 dB to 40 dB
Ambient Operating Environment: 0° C to 55° C
Power Requirement: GROUND-REFERENCED 24 Vdc @ 45 mA