Product Description
RDL ST-LCR1 Logic Controlled Relay - Momentary
Overview
The ST-LCR1 provides double-pole, double-throw dry switching contacts and LED indicator for relay closure. The ST-LCR1 provides momentary operation and is ideally suited where additional switching contacts are needed to be added to nearly any type of control signal.
Power Supply Not Included
Recommended Power Supply:
- PS-24AS (USA)
- PS-24AX (International)
Features
- Add Contacts to Any Control Signal
- Activation from Logic Circuits
- DPDT Switching Relay
- Open-Collector Switching
- Control from Switch, Button or Logic Circuits
Specifications
Control Inputs: SLAVE terminal used as an input from remote push-button or switch turns on relay when that switch is on. Activation is by connecting this input to Ground. Input from other equipment's open-collector output turns relay on when open-collector is on.
Note: RDL switching STICK-ONs have open-collector outputs suitable for driving an ST-LCR1.
5V+ accepts 3.5 to 12 Vdc to turn on relay. Relay is on only when this control signal is applied.
24V+ accepts 12 to 35 Vdc to turn on relay. Relay is on only when this control signal is applied.
5V+ accepts 3.5 to 12 Vdc to turn on relay. Relay is on only when this control signal is applied.
24V+ accepts 12 to 35 Vdc to turn on relay. Relay is on only when this control signal is applied.
Control Output: SLAVE terminal open-collector @ 25 mA suitable to drive indicators or slave LCRs
Switching Contacts: Double-pole, double-throw
Maximum Switching Power: 60 W (220 Vdc, 125 Vac, 2 A)
Ambient Operating Environment: -10° C to 55° C
Power Requirement: GROUND-REFERENCED, 24 Vdc @ 50 mA * Assumes 20 mA max load at SLAVE output
Dimensions: Height: 0.7 in. (1.7 cm), Width: 3 in. (7.6 cm), D...