Product Description
RDL D-SFRC8L Audio Selector for SourceFlex Distributed Audio System
Overview
The D SERIES-SFRC8L Audio Selector is a SourceFlex module for wall mounting in a room, providing source selection from up to 8 audio sources. A numeric display shows the selected source. There are two line-level audio outputs on the rear of the unit, balanced and unbalanced, to feed an external power amplifier.
The balanced line output level is +4 dBu nominal. The unbalanced output is -10 dBV.
The D SERIES-SFRC8L is designed to be mounted in a wall box. Wiring is connected through a rear-panel detachable terminal block. The -SFRC8L is ideal for office distributed sound systems with background music and a paging source.
Features
- Single Room Listening Station with In-Wall Controls
- Source Selection Pushbutton
- Selection From up to 8 Audio Sources
- Line-Level Audio Output
- Mounts In Wall Using US Single Gang Electrical Box or RDL® WB-1U
- Compatible with Other RDL Wall Plates and Controls
- Ideal for Office Distributed Sound Systems with Music and Paging
Specifications
Input | 10-position detachable terminal block |
Display | 7-segment red LED (0 = off or Paging; 1 through 8 = selected channel) |
Selector Push Buttons | Momentary button channel |
Frequency Response | 20 Hz to 20 kHz (±0.1 dB) |
THD + N | < 0.1% (20 Hz to 20 kHz) |
Noise | <-85 dB (Below +4 dBu) |
Control Signal | DC (DISPLAY RAMP and CONTROL conductors between remote Listening Station and Controller) |
Line Outputs | 2x Line Outputs +4 dBu balanced, -10 dBV unbalanced, nominal |
Power Requirement | 24 VDC @ 30 mA, Supplied from SourceFlex controller |
Operating Environment | Ambient Operating Environment: 32° to 122°F (0° to 50°C), 68°F (20°C) recommended |
Dimensions | 4.1 x 1.1 x 1.7" (10.4 x 2.9 x 4.4 cm) |