Product Description

Rane RAD22 Universal Wall RAD

The RAD22 adds flexible I/O capability to RANE DSP systems. It provides two mic and two line inputs via XLR/TRS combination jacks and an 1/8” (3.5mm) stereo line output for monitoring, recording or amplification. Smart muting allows for the disconnecting of XLR and 1/4” cables to prevent disruption to sound systems for hot-swapping of microphones - even with 24V phantom power applied. Connect the RAD22 to RANE DSP with a Cat5e (or better) cable for a local run up to 500 feet (150m) away from the equipment rack.

Each RAD22 may be installed onto a standard U.S. two-gang electrical box, or flush-mounted to a wall surface.

Features

• (2) XLR/TRS combo jack inputs with auto-switching for MIC or LINE level inputs
• Smart muting enables hot-swapping of inputs without sound system disruption
• 3.5mm TRS line output for recording, monitoring with headphones, and live sound amplification
• RJ45 connection to Rane multiprocessor
• Standard enclosure and standard back box mounting options for US, UK and EU
• Isolation circuitry prevents hum due to long cable runs with ground differentials
• Improved codec for superior audio transmission
• Completes the RAD family while complimenting the RAD16z

Specs

• Input Signal LEDs:
  • Green LED = 50 dBFS
  • Red LED = 0.5 dBFS
• Microphone Inputs: (Level set in hardware)
  • Input Impedance: 2.16 kΩ balanced (1.08 kΩ + 1.08 kΩ)
  • Gain Range (dynamic mic mode): 26 - 46 dB, in 1 dB steps
  • Gain Range (condenser mic mode): 14 - 34 dB, in 1 dB steps
  • Max Input (dynamic mic mode): -16 dBu, Gain = 26 dB
  • Max Input (condenser mic mode): -4 dBu, Gain = 14 dB
  • Equivalent input Noise: -121 dBu, 20 kHz BW, Rs = 150Ω, Gain = 26 dB
  • CMRR: -70 dB, Rs = 150Ω, 1kHz, Gain = 26dB
  • Frequency Response: 20 Hz - 20 kHz, +0, -0.5 dB at all Gain settings
  • THD + Noise: < 0.010% @ 1 kHz, 20 kHz BW, Rs = 150Ω, Output = -6 dBFS, Gain = 26
  • Phantom Power: 24VDC, 10mA Max
  • Digital Codec: 48kHz/24-bit
• 1/8” (35mm) Output
  • Impedance: 200Ω, 1%, each leg
  • Maximum Output: 14 dBu, < 1% THD, 10 kΩ load
  • Dynamic Range: 106 dB, 0 dBFS, 20 kHz BW, A-weighted
  • Frequency Response: 20 Hz - 20 kHz, +0.0/-0.5 dB
  • THD + Noise: 0.008% @ 1 kHz, 20 kHz BW, -6 dBFS output
• Dimensions (width x depth x height): 5.6” x 1.4” x 4.8” (143 x 36 x 123mm)
• Weight: 0.94 lb (0.45 kg)

Specifications subject to change without notice

Also includes

• RAD22
• Mounting Plate
• Screws
• Installation Tools
• User Guide
• Safety & Warranty Manual