Product Description

PXM Lighting PX787 DMX / DALI Interface

Overview

PX787 is a DMX-512 control signal converter for DALI protocol.
DMX / DALI 1ch is an advanced converter that allows to combine lighting installations based on the DALI protocol with DMX-512 control system. Using the PX787, you can connect devices working in the DALI protocol to the controller sending the DMX-512 signal.
The device is equipped with two DMX (in / out) ports and one DALI port which allows to connect up to 64 devices – in accordance with the DALI standard. The converter also supports four digital inputs, from which you can set such actions as: turn on / off, set the scene or set the brightness.*
Managing PX787 settings is possible by means of buttons and screen or by means of a built-in Web Server. Changing the settings includes:

• searching for DALI devices
• change of ballast parameters (e.g.: brightness, address, “fade time”, “fade rate”, etc.)
• change of converter network settings
• firmware upgrade

DMX / DALI 1ch has been placed in a housing adapted for mounting on a 35mm DIN rail and is supplied with 12 – 24V DC safe voltage. Please note that the DALI line must have external power supply.

* - support for external keys is available from serial number 21030041

The power supply / DALI / DMX connector system has changed from the serial number 22020242.

Note! Please read the upgrade instructions before upgrading to 2.0.0.

Specifications