Product Description
PXM Lighting PX746 Driver LED C.C. 3x700mA
Overview
The PX746 current driver has been designed for LED control.
The built-in DMX receiver allows for controlling 3 channels (e.g. R, G, B) using the DMX protocol directly. The wide range of power supply voltage (12 - 48 V DC) and high current-carrying capacity (700 mA max) enable controlling high numbers of LEDs.
The PX746 can be controlled with the DMX signal or it can work on its own. In this case, the user has a fully programmable scene and 18 preprogrammed sequences for which the playback speed and smoothness of step changing can be freely set. The driver has a built-in flicker free frequency control system, which makes it especially suitable for use in the television industry.
As the RGB series LEDs often differ quite considerably in parameters, the driver has been equipped with the ability to limit the maximum output power of individual output channels.
What is more, the driver has been equipped with an output for the temperature sensor and RDM protocol support. The support of the sensor allows for power reduction depending on temperature.
Specifications
| output channels | 3 |
| outputs load capacity | 700 mA / channel (+/- 5%) |
| maximum current consumption | 2,1 A |
| control accuracy | interpolated 16 bit |
| built-in programs/scenes | 18/1 |
| Master/Slave mode | yes |
| RDM | YES |
| power supply | 12-48 V DC |
| weight | 0,15 kg |
| output connectors | PCB terminal block; Push-button; max.1.5 mm² |
| dimensions | Width: 192 mm Heigth: 44,8 mm Depth: 20,6 mm |
