Product Description
PXM Lighting PX282 Driver LED C.V. 3x6A
Overview
LED Driver 3 x 6A with built-in DMX-512 receiver.
Driver PX282 is designed to control the LEDs. The product has been mounted in DIN rail mounting capable casing. Built-in DMX receiver allows to control 3 DMX channels (R, G, B) directly with the DMX protocol. Wide range of power supply voltage and high current carrying capacity outputs (6A) permit a control of large quantities of LEDs.
PX282 can be either controlled by DMX, and act independently. In this case, the user is offered a fully programmable scene and 18 pre-programmed sequences, which can also freely change the playback speed and fluidity changes in steps. Thanks to the interpolated resolution of the output control at the 14 bit level at a PWM frequency of 1.5kHz, the control of the parameters of individual channels is completely smooth. In addition, the PX282 driver gained control mode called effect mode, to control the programs built into the driver and the simultaneous change the settings of parameters such as speed, brightness and fade'a using DMX-512 signal sent from the external controller.
Specifications
| DMX IN/OUT channels | 512/24-512 |
| output channels | 3 |
| outputs load capacity | 6A / channel |
| output connectors | terminal blocks |
| built-in programs/scenes | 18/1 |
| Master/Slave mode | YES |
| maximum current consumption | 18 A |
| PWM frequency | 1.5 – 25kHz |
| power supply | 12-24 V DC |
| weight | 0,1 kg |
| dimensions | width: 35 mm (2 DIN rail modules) height: 90 mm depth: 58 mm |
