Product Description
PXM Lighting PX254/cc Driver LED C.V. 3x6A/cc
Overview
LED Driver 3 x 6A with built-in DMX-512 receiver.
Driver PX254 is designed to control the LEDs. This is an improved successor of the PX139 driver placed in new housing. Built-in DMX receiver allows to control 3 DMX channels (R, G, B) directly with the DMX protocol. Wide range of power supply voltage and high current carrying capacity outputs (6A) permit a control of large quantities of LEDs. What is more the PX254 has built-in fuses that can be replaced by the user by himself.
PX254 can be either controlled by DMX, and act independently. In this case, the user is offered a fully programmable scene and 18 pre-programmed sequences, which can also freely change the playback speed and fluidity changes in steps. Thanks to the interpolated resolution of the output control at the 14 bit level at a PWM frequency of 1.5kHz, the control of the parameters of individual channels is completely smooth. In addition, the PX254 driver gained control mode called 7-byte to control the programs built into the driver and the simultaneous change the settings of parameters such as speed, brightness and fade'a using DMX-512 signal sent from the external controller.
Specifications
| control protocol | DMX 512 /RDM |
| DMX IN/OUT channels | 512/24-512 |
| output channels | 3 |
| outputs load capacity | 6A / channel |
| output connectors | terminal blocks |
| built-in programs/scenes | 18/1 |
| Master/Slave mode | YES |
| RDM | YES |
| maximum current consumption | 18A |
| PWM frequency | 1.5 – 25kHz |
| power supply | 7-24V DC |
| weight | 0,15 kg |
| dimensions | 175 x 42 x 27 mm |
