Product Description
PXM Lighting PX165 Splitter DMX
Overview
Creates splits in complex DMX installations.
Using the PX165 Splitter, it is possible to split the input DMX signal into 6 independent control branches. Particular output routes are galvanically and optically separated and appropriately strengthened, which guarantees proper operation of the entire installation. Certainly, connection of the receivers to particular output routes must be performed according to the principle of the series chain with a terminator at the end.
Installation of the Splitter is limited to power connection and attachment of the DMX signal cables. After turning the device on, the input DMX signal is safely multiplied to 6 outputs.
Optically isolated DMX input.
Each of 6 outputs is optically isolated.
LED on the front panel twinkles, when the DMX signal is valid.
Manufactured in a version for DIN rails mounting.
Starting from the device with serial number 13030326 the supply voltage
range was extended up to 12-24V.
Specifications
| DMX IN/OUT lines | 1/6 |
| DMX IN/OUT channels | 512/512 |
| DMX lines connectors | clamping screws |
| isolation between input and outputs | > 1000 V |
| power supply | 12-24 V DC |
| power consumption | max. 7 W |
| dimensions | 105 (6 DIN rail modules)x 86 x 60 mm |
