Product Description
Pathway Connectivity PWINF DIN PWM6A DMX Interface, DIN-mount, 6 Channel Pulse Width Modulation 6 Amps DC Dimmer (8") (Old Part #1008-6A)
Pathway DMX Interfaces provide a flexible way of creating custom solutions to DMX control challenges. The 6-Channel PWM DC Dimmer provides direct pulse-width modulation (PWM) control of common anode, constant voltage LED fixtures and other DC loads. Multiple modes, including 16-bit resolution, ensure a smooth dimming curve. The unit provides efficient switching control of DC devices such as solid-state relays and solenoids. Compact and DIN-rail mountable, the Pathway 6-Channel PWM DC Dimmer is field configurable through its front panel, or through RDM.
Features
- Convert DMX512 levels to PWM (Pulse-Width Modulation) signal
- Control constant voltage LED fixtures rated between 5 to 30VDC1
- Six PWM outputs, individually fused at either 4A or 6A; spare fuses included
- Inputs for six auxiliary source 0-10VDC control signals are HTP-merged with DMX input
- DMX-present relay for external triggering of relays or control signals (normally-open or normally-closed)
- Contact Closure "panic" input drives all outputs to full
- DMX512 start address and operating mode configurable from front panel or remotely using RDM
- Indicator LEDs for Power, Processor, DMX Input, Active Output
- User-configurable smoothing algorithm
- User-configurable minimum and maximum output levels
- Multiple loss-of-signal options
- Diagnostics and test modes
- DMX line termination switch
- Data and power easily daisy-chained to other DIN Interface units
- One DMX Input, and one DMX Thru connection
Accessories
- PWPWR DIN TERM 50W 24VDC1 Power Supply, DIN-mount, Compression Fit Terminal, 50 Watts, 24 Volts DC
- PWENC SHELF HOR DIN System Enclosure, 2-RU Shelf unit with 2x16.5", Horizontal Rails
- PWENC SML VER DIN System Enclosure, Small 10" x 13" x 4.5", Vertical Rails
- PWENC MED VER DIN System Enclosure, Medium 10" x 23" x 4.5" , Vertical Rails
- PWENC SML HOR DIN System Enclosure, Small 10" x 13" x 4.5", Horizontal Rails
- PWENC MED HOR DIN System Enclosure, Medium 10" x 23" x 4.5" , Horizontal Rails
- PWENC LRG VER DIN System Enclosure, Large 18.5" x 31.5" x 6.25", Vertical Rails
- PWCON SPARE IDC5 Q4 Connector, Spare, 5-Pin Insulation Displacement Contact Connector, (Qty 4)
- PWCON SPARE CSC5 Q4 Connector, Spare, 5-Pin Compression Screw Connector, (Qty 4)
