Product Description
Nexlight PS-PP7000 Heavy Duty Occupancy/Vacancy Power Pack
The PerfectSense PS-PP7000 contains both a 24 VDC power supply and a 20 Amp line voltage relay providing low voltage power and line voltage control for PerfectSense Occupancy Sensors. The Power Pack can automatically be turned ON and OFF using an occupancy sensor input, BMS input, or timer input and can manually be turned ON and OFF using a low voltage momentary switch. Multi-circuit control can be handled using multiple power packs.
Features:
• Regulated 24 VDC, 150 mA Current Output
• Auto ON/Manual ON input control for Occupancy Sensors
• Hold ON/Hold OFF capabilities
• Local input control
• Title 24 compliant
• Internal/External Junction Box Mounting
• Fluorescent Ballast Cavity Mounting
• Rated for Plenum Spaces (UL2042)
Specifications:
RATINGS:
Power Input: 120-277VAC ~ 50/60Hz
Power Output: 24VDC 150mA (Class 2)
Max. Operating Temp: 60°C
MAX LOAD RATING:
20A LED Loads 120/240/277VAC, 2400W/4800W/5500W
20A Ballast 120/240/277VAC, 2400W/4800W/5500W
4A Electronic Ballast, 277VAC, 1000W
20A Tungsten, 277VAC, 5500W
MOTOR LOAD:
1Hp Motor Load, 120VAC / 2Hp Motor Load, 240/277VAC
Installation Instructions:
1. Provide separate overcurrent protection in accordance with the National Electrical Code® and applicable local codes.
2. Use copper wire only.
3. Con that the device rating is proper for your application.
4. Mount the power pack to a suitable junction box using the 1/2-in., threaded nipple and lock. The power pack is plenum-rated, and can be mounted to the inside or the outside of a junction box or in a ceiling plenum.
5. Connect the power pack as shown on previous page. Use approved wire nuts for electrical connections.
