Product Description
Lightronics TL3012 12 Channels, 24 Scenes Optional Wireless DMX (5 pin or 3 pin)
The TL3012 is a compact, portable, digital dimmer controller. It is suitable for church, stage, theater, disco, night club, live performances and other event and artistic applications. It provides 12 channels of LMX-128 (industry standard multiplex) control on a 3 wire cable. It can optionally provide DMX output. The TL3012 operates in a 2 scene manual mode or can provide 24 preset scenes organized in 2 banks of 12 scenes each. Twelve user defined chase patterns are always available. Scene fade rate, chase rate and chase fade rate are user controlled. Audio may also be used as a chase rate control. Other features of the TL3012 include: a master fader, momentary buttons, and blackout control. Scenes and chases stored in the unit are not lost when the unit is turned off. |
Specifications
|
Specifications:
- Channels: 12
- Chase: 12 Programmable 12 Steps each
- Operating Modes: 2 Scene Manual Mode Preset Scene Mode Chase Mode
- Memory: Non Volatile -
- Scenes and Chases Retained when Unit Powered Off Scenes: 24 Scenes 2 Banks of 12 Scenes each
- Control Protocol: LMX-128 (3 pin multiplex) DMX-512 Optional
- Power Requirements:
- Phantom Power: 18VAC or +15VDC, 400ma
- External Power: 13 - 25VAC or VDC, 400ma
- Size: 10.25”W x 9.25”D x 2.5”H
- Weight: 4.3 Pounds
Architect & Engineer’s Specification:
The lighting control console shall have one manual 12 channel scene; two manual 12 channel scenes; or 24 preset programmable scenes offered in 2 banks of 12 scenes each, the operation is selected by a MODE switch. A crossfader control enables full fade versatility between scenes. Momentary (bump) buttons enable instant channel turn on. Twelve 12 step chases are user programmable. Scene fade rate, chase rate, and chase fade rate are user controlled. There shall be an overall master fader, blackout function, and control of the chase rate. A built in microphone allows audio tempo chase control. The console shall have a nonvolatile memory to retain scenes and chases when powered off. The console is supplied standard with LMX-128 (multiplex) control on a 3 wire cable. It can provide USITT DMX-512 as an option. The power requirements for the console shall be in 3 wire multiplex mode: 18VAC or +15VDC, 400ma minimum; and/ or when DMX-512 is being used an external power supply is needed: 13 - 25VAC or VDC, 400ma minimum. Construction is of 16 gauge steel and no rivets are used in the construction. Nylon “break resistant” shafts are used on the fader controls. The console is 10.25”W x 9.25”D x 2.5”H and the weight is 4.3 pounds. The lighting control console shall be a Lightronics TL3012.