Product Description
Colortran ENR Standard Viewpoint control module LEC-2100, conversion from architectural control to remote control
Ship us your ENR Standard Viewpoint control module and we will convert it from architectural control to remote control. The advantage to this conversion to remote control is that the architectural side of the control module won't need to be supported.
The remote control module is a stand-alone DMX control module that works with no special software. Alternative, the ENR Standard Viewpoint control module requires that the Viewpoint program be used to program and operate the system, whether you are using DMX solely or both DMX and the architectural control system. Consequently, by converting to remote control you can abandon the Viewpoint system.
One very important note is if you have Viewpoint control stations they will not work with the ENR remote control module. If you will continue using Viewpoint control stations, then do not make this conversion to a remote control module.
Ship your ENR Standard Viewpoint control module to us at the following address:
Knight Sound & Lighting
Repairs
4845 Allen Rd
Stow, OH 44224
This conversion will take approximately 2 to 3 weeks to complete. Contact our offices to inquire about expedite services for a quicker turnaround on this conversion.
We will then ship the remote control module back to you via Ground shipping services.
Call us at 866-457-5937 with tech questions at any time. We are happy to help.
