Product Description
ILC LSSIICM-MOD LightSync Digital Serial Interface Input Control Module AV/RS232
The LightSync Serial Interface Input Control Module can be added to any LightLEEDer panel to provide LightSync device emulation from any building automation system using BACnet IP, BACnet MSTP, Modbus RTU, Modbus ASCII, Modbus TCP, or Metasys N2 serial protocol. With the panel module, commands can be sent to the panel to trigger inputs ON and OFF, force photocell levels to drive dimming outputs, and read status of pilots and photocell levels. Inputs are mapped through the panels keypad or with LightLEEDer Pro software.
FEATURES
- Made in the USA
- Digital CAT 5 ready
- Direct communications for BAS or AV system control of LightSync input points
- Emulates LightSync inputs and analog photocells
- Status (pilots) of relays, groups, presets, and photocell levels
- Installs directly into LightSync network using LightSync device addresses
- Extractable files from BACnet and LonWorks modules
- Control 1-64 LightSync devices
- Adjustable Modbus baud rate
SPECS
Physical:
- NEMA1 enclosure 6.5" W x 9.25" L x 2.5"D
- 6” Power leads 120V
- 1/2” Conduit nipple for connection to junction box
- RJ45 connectors for interfaceing to LightSync network
- Ethernet terminal with RJ45 for IP interface
- Removable screw down connectors for RS485 or RS232 data communication
- Rotary and dip switches for addressing and configuring
- Mounting holes provided
- Plenum rated enclosure
Electrical:
- Powered from the panel
- 5 VDC power supply provided
Operating Environment:
- Location: Interior space
- Operating Temp.: 0° to 50° C
- Humidity: 10% - 90% Non-condensing
- Atmosphere: Non-explosive/corrosive
- Vibration: Stationary
Certifications and Approvals:
- FCC Part 15
- UL, CUL