Product Description
ILC LSOSI-PR-P LightSync Occupancy Sensor 4 Input Module - Panel Mounted on a plate with RJ45 connectors
The LightSync Digital Occupancy Sensor Input module is designed to power and receive signals from 2 sensors on each of its 4 independent inputs. Eliminate expensive power packs by simply direct- wiring the sensors into the LightLEEDer inputs. This module mounts directly in the panel on the output module, or can be mounted remotely in a location central to the sensors. Each independent input can control any relay(s), group(s), or preset(s) throughout the network. Inputs also have a time-of-day or open/close time-of-action which could disable the input or change the relays controlled.
FEATURES
- Made in the USA
- Digital CAT-5 Ready
- Provides power and inputs for occupancy sensors
- Digitally addressable device for a unique address
- Connectors are easy non-screw push-to-connect type
- Optically isolated inputs to protect the electronics
- Sensor signals accepted directly on module
- Connect multiple sensors to each input
- Power packs not required
- Works with most major manufactured sensors
- Panel mount (P) installs directly on output board
- Remote mount (R) provided with 4-11/16" J- box
- Panel mounted with Plate (PR-P) module with RJ-45 and mounting plate for 2 modules
SPECS
Physical:
- 2.75” W x 3.5” H
- 2.75” Wide X 3.5” High
- Easy non-screw push-to-connect terminals
- Digital addressing switches
- RJ45 connectors for remote mounting options
- R option provided with 4-11/16" junction box
- PR-P option provided with 6.0" x3.5" mounting plate
Electrical:
- Powered from panel transformer (remote option powered by 24VAC transformer).
- 200mA @ 24VDC maximum draw per module
Operating Environment:
- Location: Interior space
- Operating Temp.: 0° to 50° C
- Humidity: 10% - 90% Non-condensing
- Atmosphere: Non-explosive/corrosive
- Vibration: Stationary
Certifications and Approvals:
- FCC Part 15