Product Description
ILC LL14-EM-347 LightLEEDer Panel - Capacity for 14 R40-1 Relays - Emergency UL924 Rated - 120/347VAC
Overview
The LightLEEDer Emergency UL 924 bypass relay control panel will force relay’s ON during a normal power outage. This panel has all the same features and functions as a standard LightLEEDer lighting controller, allowing normal control of relays with emergency bypass during a normal power failure event. Relays can be all EM or a combination of normal and EM. Each output has a jumper for selecting Force On, Force Off or No change, this allows for emergency on, load shedding off, or no control selection for each relay. Provided With Phase monitoring module and high voltage dividers. This LightLEEDer Emergency lighting panel is easy to install, no external devices or complicated wiring configurations needed, reducing material and installation costs.
Features
- Made in the USA, meets BABA Requirements
- Digital CAT 5 ready
- UL 924 bypass relay operation of R40 relays
- Selectable Force On, Force Off, or No Change
- Standard Relays supported: R40-1, -2, -3 pole
- Normal & EM relays in same enclosure
- High Voltage Dividers for separation
Specifications
Relays:
- Superior breaker style design
- Switch type override control
- Lockout feature disables control from panel
- 40 Amps @ 120, 277 and 347 VAC
- 1-, 2-, or 3-pole configurations
Safeguards:
- Power surge and spike suppression up to 123 volts on the 24VAC power input
- Data Line surge and spike suppression up to 8Kv and 15Kv through air
- Memory retention for firmware and programming up to 200 years and electrostatic discharge to 4Kv
- Real-Time-Clock time retention 45 days or greater without power
- Internal memory backup and restore
Physical:
- Relay bypass output module (RBOM)
- Phase monitoring module (PMM)
- Double-sided construction for mounting directly to breaker box or stand alone
- Pre-drilled mounting holes for easy installation
- Provided with a removable hinged locking door
- High voltage barriers separate Normal/Emergency and Class 1/Class 2 wiring.
Electrical:
- 120/277 VAC @ 1 Amp, or optional 120/347 VAC
Capacities:
- Up to 62 single pole relay with PMM
- 1 to 4 add-on modules
Operating Environment:
- Location: Interior space
- Operating Temp.: 0° to 50° C
- Humidity: 10% - 90% Non-condensing
- Atmosphere: Non-explosive/corrosive
- Vibration: Stationary