Product Description
ILC LL-EVO LightLEEDer-EVO Distributed Control Panel
The LightLEEDer-EVO is a distributed lighting control panel that simplifies installation. The LL-EVO can be expanded from the local port using a LL-EVO-RC, LL-EVO-4X, and/or LL-EVO-8X. This panel operates the R20 style relays that connect using a standard CAT-5 cable. The remote mounted R20 relay is suitable for lighting or plug-load use. The LL-EVO has 16 pre-programmed lighting applications, push to connect terminals with color coded labels, internal time clock, and galvanically isolated 0-10V dimming. The LL-EVO can operate as a stand-alone panel or networked, reverting to stand-alone automatically if the network is interrupted. When installing, simply set the panel for a lighting application and it is up and running. This allows the installer to confirm wiring and fixture performance from the start saving time and start-up expense. Each of the 16 application programs can still be modified or customized using the standard ILC software. The remote mounted R20D relay has both line voltage and the 0-10V dimming control wire leads for easy wiring.
FEATURES
• Made in the USA
• Digital CAT-5 Ready
• Distributed lighting controller
• Outputs for up to 4 R20 relays
• Plug-load compatible
• Remote mounted relay for direct connection to loads
• Galvanically Isolated 0-10 dimming for 4 zones
• Status LED and Override buttons for remote relay control
• Standalone or networked with any LightLEEDer controller
• Time clock includes 7/365-day calendar, Daylight Savings Time, Astronomic, Open/Close
• 200mA power provided for occupancy or vacancy sensors inputs
• RJ45 connectors for networking, CAT-5 devices, and R20 relays
• Enclosure, suitable for plenum mounting
SPECS
Safeguards:
• Power surge and spike suppression up to 123 volts on the 20VAC power input to controller
• Memory retention for firmware and programming up to 200 years and electrostatic discharge to 4kv
• Real time clock retention 45 days or greater without power
• Galvanically isolation to 1500V for the 0-10VDC dimmer outputs, with revert to 100% on power loss
Physical:
• Enclosure: 9-3/4”x 6”x 3”NEMA 1
• Galvanized steel enclosure and screw cover
• Provided with pre-drilled mounting holes
• High voltage barrier separates Class 2 wiring
• ½”nipple for mounting to electrical box
• 6”wire leads for high voltage connections
• Push to connect low voltage terminals
• Color coded labels for easy terminal identification
• RJ45 connectors provide for easy connection
• Enclosure, suitable for plenum mounting
Integrated Interfaces:
• 4 inputs for hardwire switches or occupancy sensors
• Photocell controller for 2 sensor heads or zones
• RJ-45 port for up to 61 ILC CAT-5 devices
• 4 RJ-45 ports for R20 remote relays
Electrical:
• 120/277VAC @.6 amps (120/347VAC Optional)
• Input: 24 VDC (See below for details)
• Dimming: 100mA sink PoweredDevices/Distance/Input PowerDraw:
4 CAT-5 devices, 400' accumulative feet, 200mA occupancy sensor power
5 CAT-5 devices, 500' accumulative feet, 160mA occupancy sensor power
6 CAT-5 devices, 600' accumulative feet, 120mA occupancy sensor power
7 CAT-5 devices, 700' accumulative feet, 90mA occupancy sensor power
8 CAT-5 devices, 800' accumulative feet, 60mA occupancy sensor power
Additional LightSync devices can be supported by adding a PSR.
Operating Environment:
• Location: Interiorspace
• Operating Temperature: 0° to 50° C
• Humidity: 10% - 90% Non-condensing
• Atmosphere: Non-explosive/corrosive
• Vibration: Stationary Certifications and Approvals:
• UL and CUL listed
• FCC Part 15
• Title 24
• ASHRAE compliant
• IECC compliant